Construction of three-dimensional porous network Fe-rGO aerogels with monocrystal magnetic Fe3O4@C core-shell structure nanospheres for enhanced microwave absorption

Single dielectric loss material has defects such as strong dielectric properties and impedance mismatch. Hence, developing electromagnetic wave (EMW) absorption materials with both outstanding EMW absorption and favourable impedance matching performances is still a great challenge. A large number of literature have reported that combining dielectric materials with magnetic materials to enhance microwave absorption. However, there is little literature on the effect of crystal structure on the absorbing properties of materials. Owing to the virtues of light weight, low density and thin thickness of aerogel, which has been widely utilized in EMW absorption materials. Herein, Fe-based metal organic framework-reduced graphene oxide (Fe-rGO) aerogel was synthesized via simple hydrothermal method and freeze-drying. Besides, Polyvinyl Pyrrolidone (PVP) was used as a surfactant to endow Fe3O4 nanospheres with uniform size and smooth morphology. Moreover, Fe3O4 nanospheres with different crystal phase (monocrystal and polycrystal) structure were obtained under different carbonization temperatures (600 and 800 °C). Through comparison, the monocrystal Fe3O4 nanospheres show better microwave absorption and impedance matching performance than that of polycrystal Fe3O4 nanospheres. In addition, the electromagnetic parameters can be adjusted by regulating the mass ratio of Fe-based metal organic framework (Fe-MOF) to GO. As a consequence, the prepared 600Fe-rGO 2:1 aerogel achieves the minimum reflection loss (RLmin) of −64.89 dB and a broad effective absorption bandwidth (EAB) of 6.96 GHz with a low filling content of 5 wt%, showing excellent EMW absorption and impedance matching property. In short, the structural design of single crystal magnetic Fe3O4 nanospheres provides inspiration and guidance for future research of enhanced microwave absorption materials.