经营本企业自产产品及相关技术的出口业务；经营本企业生产、科研所需的原辅材料、机械设备、仪器仪表、零配件及相关技术的进口业务；经营本企业的进料加工和“三来一补”业务。生产、销售饮料、纯净水、冷冻饮品、房屋租赁（以上限分支机构凭有效许可证经营）。经营政府授权的国有资产，冶金产品和副产品、钢铁延伸产品、化工产品（不含易燃易爆及危险品）、冶金辅料、机加工产品、农副产品（不含棉、烟、茧、粮）生产经营；冶金机电设备设计、制造和经营，技术服务、协作、咨询服务；利用自有电视台，发布国内电视广告，承办分类电视广告业务。家电及配件、文体用品、广电器材的销售；住宿、餐饮、旅游管理、软件和信息技术服务；招标投标代理。
The CO2 gas shielded arc welding test of Q500qENH bridge weathering steel was carried out by horizontal transverse butt welding.The metallographic structure of the welded joint was observed by an OM,and the mechanical properties of the welded joint were tested by a hardness tester and tensile testing machine.The corrosion behavior of deposited metal in the industrial atmosphere was simulated through a cyclic immersion test.The structure and chemical composition of the rust layer were characterized by SEM and XRD,respectively.The corrosion weight loss rate of the deposited metal was measured.Finally,the corrosion resistance of the rusted specimen was evaluated by an electrochemical test.The results show that Q500qENH has a low hardening tendency and cold crack sensitivity during welding.The tensile strength of the joint is higher than 650 MPa,and it has good bending resistance and low-temperature impact toughness.The corrosion products at the deposited metal after cyclic immersion in the corrosive solution for 48 h are α-FeOOH and γ-FeOOH.After 96 h of corrosion,a large amount of black Fe3O4 is generated in the rust layer,which then gradually decreases.The phase of the rust layer transforms into a stable lamellar α-FeOOH,which has a relatively dense structure and excellent corrosion resistance.In addition,Al2O3 inclusions and Si-rich phases in the rust layer will cause the formation of porosity,micro-cracks,and pores in the rust layer,which will adversely affect the compactness of the rust layer.
