Red mud is a substantial solid waste produced by the alumina industry, with an annual global output of more than 100 million tons, while its comprehensive utilization rate is still less than 15%. The environmental pollution caused by its extensive stockpiling has become a major issue restricting the sustainable development of the industry. This paper summarizes recent research findings on red mud recycling both domestically and internationally, and based on the development status of recycling technology, proposes three collaborative approaches for red mud treatment: source reduction through production process optimization, resource recovery of valuable components, and large-scale utilization for extensive consumption. The analysis suggests that future improvements in recovery efficiency and expansion of recovery scale for red mud will require innovations in production processes to reduce output, enhancing resource utilization efficiency through multi-element collaborative recovery, and relying on large-scale utilization to improve harmless treatment levels. These measures aim to transform red mud from “red solid waste” into a “green resource,” thereby supporting the high-quality development of the aluminum industry.
Rational band alignment that facilitates efficient separation and transport of carriers is essential for boosting the photoelectrochemical water splitting activity of photoelectrode. Herein, AgInS2 nanoparticles (NPs) were employed to sensitize CdO nanorod arrays (NRAs) photoelectrode, establishing a directional charge transport channel for rapid carrier migration, resulting in significantly improved PEC performance. The as-constructed CdO/AgInS2 NRAs heterojunction photoelectrode at 0 V vs. Ag/AgCl achieves a photocurrent density and a hydrogen evolution rate of 1.74 mA cm- 2 and 19.45 mu mol cm- 2 h- 1, corresponding to 3.3-fold and 2.3-fold enhancements in comparison with the unmodified CdO NRAs photoelectrode, respectively. Electrochemical and photoluminescence (PL) measurements reveal that the directional charge transport channel established via the type-II heterojunction at the CdO/AgInS2 interface facilitates promotes the migration and separation of charge carriers. This study demonstrates a viable approach from an interface band engineering perspective for designing efficient CdO-based photoelectrodes toward PEC water splitting for hydrogen production.
To address the long-standing trade-off between proton conductivity and mechanical stability in highly sulfonated proton exchange membranes (PEMs), we propose a molecular engineering strategy based on intrinsic acid-base pairing within fully aromatic polyamide backbones. By integrating -SO3H and -NH- groups into the polymer framework, acid-base interactions are spontaneously formed, acting as proton-conducting networks. The optimized fully aromatic multiple sulfonic acid polyamide (fa-msPA-90) membrane exhibits a high proton conductivity of 0.29 S/cm, significantly exceeding that of Nafion 117, while maintaining an outstanding tensile strength of 43 MPa. Importantly, this intrinsic acid-base pairing mechanism mitigates the trade-off between proton conductivity and swelling-induced mechanical degradation, thereby overcoming the limitations of conventional filler-based approaches. The present work establishes an effective strategy for designing high-performance, nonfluorinated PEMs through molecular-level interaction engineering.
Hydrogen production by electrocatalytic water splitting is an important route for sustainable energy conversion, but activating inert basal planes in 2D catalysts remains challenging. In this work, first-principles calculations were used to screen 60 transition-metal and nonmetal (TM-NM) dual-substituted Janus CrSSnN2 structures, from which 47 configurations with high stability were identified. HER activity evaluation further revealed 14 promising candidates with near-thermoneutral hydrogen adsorption (|ΔGH*| < 0.09 eV). Among them, Si-Ni@CrSSnN2 showed the optimal adsorption free energy of ΔGH* = 0.003 eV. To clarify the origin of activity, five machine-learning models were applied to analyze the descriptor-activity relationship. To reduce model-dependent bias and improve prediction robustness, a weighted ensemble model was constructed using sequential least-squares programming (SLSQP). Compared with the individual models, the ensemble model showed more balanced training and testing performance and enabled reliable identification of activity-related descriptor ranges. The results indicate that high HER activity generally requires a d-band center (εd) of -1.2 to 0.1 eV and a TM-H bond length (dTM−H) of 1.58 to 1.73 Å, while the TM-NM distance (dTM−NM) helps regulate local coordination. This work provides a physically interpretable and data-driven guideline for designing efficient Janus CrSSnN2-based HER electrocatalysts.
Thermomechanical loading in high-temperature structures can produce steep temperature gradients, constrained thermal expansion, and stress concentrations. Combined with temperature-dependent elasticity, plasticity, creep, and thermal conductivity, these effects accelerate damage accumulation and crack initiation and growth, especially under transient or cyclic heating. Local continuum methods can capture thermoelasticity, but evolving cracks introduce discontinuities and may modify heat-transfer paths, so coupled analyses often require additional fracture modeling and carefully designed coupling procedures. Peridynamics (PD) formulates mechanics and heat conduction through nonlocal integral interactions, allowing discontinuities to emerge without explicit crack-surface tracking. Focusing on literature published primarily since 2018, this review classifies PD thermomechanics by coupling mechanisms and constitutive assumptions, and compares representative formulations in terms of applicability, limitations, and computational cost. We synthesize numerical practices that most strongly affect predictive reliability, including boundary and surface corrections, coupling-consistent updates of thermal and mechanical operators during damage evolution, and stability and accuracy constraints for explicit, multirate, and implicit time integration. Applications are reviewed for thermal-shock and thermomechanical-fatigue cracking, manufacturing and processing with localized or moving heat input, thermo-tribological contact, and extreme service environments. Outstanding challenges include scalable three-dimensional solvers, calibration of thermal and fracture parameters, and shared verification and validation benchmarks; research directions toward efficient implementations and standardized assessment are outlined.