
It is of great significance to objectively evaluate the effects of the National Renewable Energy Action Plan () policies for the implementation and improvement of the policy itself in the solar power farms. Based on the panel data of 27 members of the European Union from 1990 to 2023, this study uses a heterogeneous timing difference-in-difference model to examine associations between policy-driven solar expansion and water stress levels in the European Union members (EU27). This study finds significant associations between policy implementation and solar panel production towards lower carbon dioxide emissions and a higher level of water stress in Western European Union members in comparison with those in Central and Eastern European Union members. Moreover, the policies have a significant impact on the solar power farm expansion and agriculture production, and land use change factors in Western European countries in comparison to the Central and Eastern European countries. These outcomes were verified by a placebo test, showing that the policy is effective, and put forward some suggestions for the further promotion of the transformation of solar power farm expansion, but without consideration for resource conservation and sustainability.
This study presents a comprehensive assessment of the European Union’s renewable energy transition, focusing on structural changes in electricity generation between 2015 and 2024. Using recent data from Eurostat and the International Renewable Energy Agency, the analysis shows that renewables reached 47.3% of total EU electricity generation in 2024, surpassing fossil fuels for the first time, largely driven by the rapid expansion of solar photovoltaic and wind energy. Despite this progress, achieving the EU’s enhanced 2030 target of 42.5% renewables and the global tripling pledge under COP28 remains challenging. Key barriers include limitations in grid integration, supply chain constraints, and slower decarbonisation in transport and heating sectors. This study highlights the need to move beyond capacity expansion towards a more integrated approach that emphasises system flexibility, sector coupling, and circular supply chains. It proposes a forward-looking policy framework that integrates technological, economic, and governance dimensions to support a resilient and climate-neutral energy system. The findings contribute to ongoing policy discussions by providing practical insights for advancing the next phase of the EU energy transition.
This study explores the challenges related to dust deposition on solar photovoltaic (PV) systems. Review of earlier works suggests solar performance is significantly affected by the dust deposition and the power loss can vary from 10% to more than 60% in some cases depending on the location. Hydrophobic coatings can offer a potential pathway for reducing dust deposition and water saving in cleaning operations. This paper presents the comparative study of the four commercially available and one developed silica-based hydrophobic coating to estimate the quantity of the water required for cleaning of the dust. Comparative experimental tests reveal that the developed coating has the highest contact angle (145 degrees), least contact angle hysteresis (5 degrees) and least surface free energy (17.4 mN/m) as compared to the other coatings. The prepared coating slightly decreased the visible light transmittance of the glass from 92.4% to 90.23%. The water saving with the hydrophobic coatings is found to be in the range 28%-55%; the highest water saving is observed with the developed coating as it is almost near to a superhydrophobic coating in behaviour. Furthermore, the scope for future work and challenges related to the development and use of hydrophobic coatings in the solar area are discussed.
Floating photovoltaic (FPV) systems are becoming increasingly popular due to many advantages in comparison to conventional systems. Combining systems with existing hydro power plants is relatively new, with few global sites, though many studies have explored it across different locations. However, a key unanswered question is how much water evaporation can be saved by adding to a reservoir, and whether the saved volume is meaningful for water management. This paper addresses that gap by focusing on the hydro power plant in El Atazar in Spain and proposes the installation of a covering 2.7% of the surface. The method uses a simplified version of Penman's equation with local climate data from meteoblue to calculate the reduction in water evaporation caused by the shading effect of the platform. The results show that the total water saved is calculated to be 61.73 m & sup3;/year, with a clear seasonal difference: approximately 2.14 m & sup3;/day saved in winter versus 8.85 m & sup3;/day in summer. To explore scalability, coverages of 15% and 50% are also analysed, yielding annual savings of 338 and 1127 m(3), respectively. These transferable findings can be utilised by hydropower operators and water managers to estimate evaporation savings for different coverages.
The study assessed changes in energy, temporal, technological, environmental, and washing-quality parameters after introducing a central heat recovery system in an industrial laundry. Instrumental measurements, gravimetric and microbiological methods, textile mechanical testing, and calculations of energy-efficiency and carbon dioxide ((2))-emission indicators were applied. Specific heat energy consumption decreased from 7.8 to 4.6 kWh/kg, while heat energy use for 100 t of laundry fell from 780 to 460 MWh. Recovered heat supplied 42% of the total heat demand, reducing steam-boiler load from 100% to 72% and shortening the washing cycle from 35 to 30 min. Washing-tunnel performance increased from 1000 to 1200 kg/h, and completed cycles per shift increased from 13 to 16. Annual natural gas consumption decreased from 430 to 300 thousand m & sup3;, and specific carbon dioxide emissions from 62 to 42 kg/t. Average moisture after drying declined from 6.5% to 4.8%, while laundry ready for folding increased from 78% to 92%. Protein-and fat-contaminant removal and whiteness also improved. A separate ozonation test increased microbial reduction but was not attributed to heat recovery. The integral energy efficiency index increased from 1.00 to 2.03.