Optical metasurfaces, comprising subwavelength quasi-planar nanostructures, constitute a universal platform for manipulating the amplitude, phase, and polarization of light, thus paving a way for the next generation of highly integrated multifunctional optical devices. In this work, we introduce a reflective metasurface for the generation of a complete (angularly resolved) polarization set by randomly interleaving anisotropic plasmonic meta-atoms acting as nanoscale wave plates. In the proof-of-concept demonstration, we achieve multidirectional beam-steering into different polarization channels forming a complete set of polarization states, which can also be dynamically altered by switching the spin of incident light. The developed design concept represents a significant advancement in achieving flat polarization optics with advanced functionalities.

Intracavity optical metasurfaces with compact and flexible light manipulation capabilities, effectively enrich the implementation of miniaturized and user-friendly orbital angular momentum (OAM) laser sources. Here we demonstrate a wavelength-tunable figure-9 Yb-doped vortex fiber laser solely with standard non-polarization-maintaining single-mode fibers, which utilizes a gap-surface plasmon (GSP) metasurface as the intracavity mode regulation component to generate OAM beams, extending the avenues and related applications for cost-effective OAM laser sources. Gained by the broadband operation range of the metasurface, the figure-9 fiber laser could emit OAM light with center wavelength tunable from 1020 nm to 1060 nm and of high mode purity (about 90%). OAM beams with different topological charges such as l = ±1 have been obtained by changing the metasurface design. The proposed fiber laser with the intracavity GSP metasurface provides a reliable and customized output of OAM beams at the laser source, holding great promise for a wide range of applications in optical communications, sensing, and super-resolution imaging.

Metasurfaces have attracted immense interest across various scientific disciplines due to their ability to manipulate light wave parameters with numerous functionalities. However, these functionalities have historically been static, lacking the capability for dynamic, real-time control. In this study, we introduce a highly efficient, tunable waveplate by incorporating a thin layer of the phase change material Sb2Se3 into a silicon all-dielectric metasurface. This structure demonstrates the ability to transition from a half-waveplate to a quarter-waveplate as Sb2Se3 shifts from an amorphous to a crystalline state at the telecom wavelength of 1.55 mu m. Remarkably, it maintains consistent performance across a range of rotation angles. In addition, we have performed comprehensive electro-thermal simulations to validate the phase change process, confirming the practical feasibility of this technology. This tunable metasurface represents a significant advancement in adaptive photonics, offering customizable and sophisticated functionalities.

Tunable optical metasurfaces (MSs) have demonstrated exceptional capabilities in actively manipulating light fields. However, most existing tunable MSs are limited to controlling only one functionality. Here, by combining a MEMS mirror with a plasmonic bilayer MS (BMS), we develop an electrically driven MEMS-BMS platform enabling complete reflection phase transformation and switching between two encoded functionalities by actuating the MEMS mirror. This capability stems from different optical responses of each MS layer at distinct MEMS-BMS separations, due to evolving topological singularities in a defined parameter space. With this tunable topological MEMS-BMS platform, we demonstrate polarization-independent MEMS-BMS for reconfigurable diffraction gratings, achieving similar to 25% efficiency, similar to 0.75 contrast at 850-nm wavelength, and fast response (similar to 5 mu s). The MEMS-BMS arrangement for generating vortex beams with switchable topological charges off1 is also demonstrated, evidenced by distinct near- and far-field interferograms. Our work expands the scope of tunable MSs by exploiting dynamic topological phases in the MEMS-BMS arrangement, paving the way for multifunctional tunable meta-optics. (c) 2024 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement

Solid-state quantum emitters (QEs) with arbitrary direction emission and well-defined polarization are critical for scalable single-photon sources and quantum information processing. However, the design strategy for on-chip generation of off-normal photon emission with high-purity polarization characteristics has so far remained elusive. Here, we introduce the anisotropic holography metasurfaces for efficiently manipulating the emission direction and polarization of QE. The proposed method offers a flexible way to realize phase matching in surface plasmon scattering with spatially varying filling factors and provides an efficient route for designing advanced QE-coupled metasurfaces. By nonradiatively coupling nanodiamonds with metasurfaces, we experimentally demonstrate on-chip generation of well-collimated single-photon emission propagating along off-normal directions (i.e., 20 degrees and 30 degrees) featuring a divergence angle lower than 2.5 degrees. The experimental average degree of linear polarization attains up to >0.98, thereby revealing markedly high polarization purity. This study facilitates applications of QEs in the deployment of integrated quantum networks.

Exceptional points (EPs), unique junctures in non-Hermitian open systems where eigenvalues and eigenstates simultaneously coalesce, have gained notable attention in photonics because of their enthralling physical principles and unique properties. Nonetheless, the experimental observation of EPs, particularly within the optical domain, has proven rather challenging because of the grueling demand for precise and comprehensive control over the parameter space, further compounded by the necessity for dynamic tunability. Here, we demonstrate the occurrence of optical EPs when operating with an electrically tunable non-Hermitian metasurface platform that synergizes chiral metasurfaces with piezoelectric MEMS mirrors. Moreover, we show that, with a carefully constructed metasurface, a voltage-controlled spectral space can be finely tuned to access not only the chiral EP but also the diabolic point characterized by degenerate eigenvalues and orthogonal eigenstates, thereby allowing for dynamic topological phase transition. Our work paves the way for developing cutting-edge optical devices rooted in EP physics and opening uncharted vistas in dynamic topological photonics.

Ultrathin multifunctional metalenses are demonstrated to control the multiple degrees of freedom of a single-photon source in hexagonal boron nitride.

Optical metasurfaces (OMSs), planar arrays of meticulously designed meta-atoms, are renowned for remarkable capabilities in manipulating the polarization state of light at subwavelength scales. Nevertheless, most OMS-empowered polarization optics remain static, featuring well-defined optical responses determined by their configurations set during fabrication. Here, we demonstrate a MEMS-OMS-based dynamic linear polarizer (DLP) with an electrically controlled extinction ratio, which is tunable in a fast and reversible fashion, by combining an anisotropic plasmonic OMS with a thin-film piezoelectric MEMS mirror. Capitalizing on the MEMS-OMS DLP, we further implement voltage-controlled grayscale imaging and vector vortex beam generation under linearly and circularly polarized excitations, respectively. Our MEMS-OMS DLP design could enable adaptive photonic systems for advanced applications in optical image encryption, displays, and beyond.

Compared to conventional lasers limited to generating static modes, mode-switchable lasers equipped with adjustable optics significantly enhance the flexibility and versatility of coherent light sources. However, most current approaches to achieving mode-switchable lasers depend on conventional, i.e., inherently bulky and slow, optical components. Here, we demonstrate fiber lasers empowered by electrically actuated intracavity microelectromechanical system (MEMS)-based optical metasurface (MEMS-OMS) enabling mode switching between fundamental Gaussian and vortex modes at similar to 1030 nm. By finely adjusting the voltage applied to the MEMS mirror, high-contrast switching between Gaussian (l = 0) and vortex (l = 1, 2, 3, and 5, depending on the OMS arrangement) laser modes is achieved, featuring high mode purities (>95%) and fast responses (similar to 100 microseconds). The proposed intracavity MEMS-OMS-enabled laser configuration provides an at-source solution for generating high-purity fast-switchable laser modes, with potential applications ranging from advanced optical imaging to optical tweezers, optical machining, and intelligent photonics.

The widespread use of multifunctional metasurfaces has started to revolutionize conventional electromagnetic devices due to their unprecedented capabilities and exceedingly low losses. Specifically, geometric metasurfaces that utilize spatially varied single-celled elements to impart arbitrary phase modulation under circularly polarized (CP) waves have attracted more attention. However, the geometric phase has intrinsically opposite signs for two spins, resulting in locked and mir-rored functionalities for the right-handed and left-handed CP beams. Additionally, the demonstrated geometric metasur-faces so far have been limited to operating in either transmission or reflection modes at a single wavelength. Here, we propose a double-layered metasurface composed of complementary elliptical and reversal ring resonator structures to achieve simultaneous and independent control of the reflection and transmission of CP waves at two independent terahertz frequencies, which integrates three functions of reflected beam deflection, reflected Bessel beam generation, and trans-mitted beam focusing on the whole space. The high efficiency and simple design of our metasurface will open new avenues for integrated terahertz metadevices with advanced functionalities.

Wavelength-tunable vortex fiber lasers that could generate beams carrying orbital angular momentum (OAM) hold great interest in large-capacity optical communications. The wavelength tunability of conventional vortex fiber lasers is however limited by the range of 35 nm due to narrow bandwidth and/or insertion loss of mode conversion components. Optical metasurfaces apart from being compact planar components can flexibly manipulate light with high efficiency in a broad wavelength range. Here, we propose and demonstrate for the first time, to the best of our knowledge, a metasurface-assisted vortex fiber laser that can directly generate OAM beams with changeable topological charges. Due to the designed broadband gap-surface plasmon metasurface, combined with an intracavity tunable filter, the laser enables OAM beam with center wavelength continuously tunable from 1015 nm to 1075 nm, nearly twice of other vortex fiber lasers ever reported. The metasurface can be designed at will to satisfy requirements for either low pump threshold or high slope efficiency of the laser. Furthermore, the cavity-metasurface configuration can be extended to generate higher-order OAM beams or more complex structured beams in different wavelength regions, which greatly broadens the possibilities for developing low-cost and high-quality structured-beam laser sources.

Surface plasmons (SPs), or SP polaritons, are electromagnetic (EM) surface waves that propagate freely along metal – dielectric interfaces while being tightly localized in the perpendicular direction due to the interaction with collective oscillations of electron plasma in the metal [1] . Therefore, SPs become two-di-mensional (2D) manifestations of EM waves, with potentially very large wavenumbers near the SP resonance,

Monolayer transition metal dichalcogenides (TMDCs) with direct bandgaps are considered promising candidates for building light-emitting diodes (LEDs). One crucial indicator of their performance is the brightness of electroluminescence (EL). In this study, we fabricate WS2-based LEDs that make full use of the assistance of effective transient-mode charge injection. By introducing self-assembled silver nanoparticles (NPs) on top of the LED, the extraction efficiency is significantly improved, with a 2.9-fold EL enhancement observed in the experiment. Full-wave simulations further confirm that the improvement comes from the scattering capability of silver NPs, with results qualitatively fitting the experiment. This approach, with its compatibility with van der Waals heterostructures, can be further promoted to enhance the brightness of 2D monolayer TMDC-based LEDs.

Optical metasurfaces have shown great potential for revolutionizing wave plates by enabling compact footprints and diversified functionalities. However, most metasurface wave plates (meta-WPs) are typically passive, featuring defined responses after fabrication, whereas dynamic meta-WPs have so far often been limited to ON and OFF states. Here, we design a dynamic dual-functional meta-WP based on judiciously designed low-loss Sb2Se3 meta-molecules at the telecom wavelength of 1.55 µm which enables reconfigurable linear-to-circular and linear-to-linear polarization conversion for orthogonal linear polarizations when Sb2Se3 transits between amorphous and crystalline states. In addition, a comprehensive electro-thermal simulation is carried out to verify the phase change process for realistic implementation. The designed dynamic dual-functional wave plate may open new avenues for developing integrated adaptive photonics with dynamic and multiplexed functionalities.

Surface-enhanced Raman spectroscopy (SERS) detection of analyte molecules at ultra-low concentrations re-quires highly-efficient plasmonic nanostructures enabling a high hot-spot density. However, a facile and cost-effective strategy toward large-area fabrication of efficient nanostructures with significant electromagnetic field enhancement remains a great challenge. Further, SERS faces reliability issues with the molecular fingerprint at ultra-low concentrations. This work shows a one-step rapid fabrication technique utilizing glancing angle deposition for growing 3D nanopillars of Ag or Au, which is facile, scalable and cost-effective. The 3D nanopillar substrates can reliably detect analyte molecules with concentrations as low as 10-18 M with a high signal-to-noise ratio molecular fingerprint proven for Cresyl violet, p-aminothiophenol and Rhodamine 6G. The ultra-high enhancement is realized in conjunction with the formation of a high hot-spot density due to localized surface plasmons and surface plasmons at metal/air interface. A portable handheld Raman spectrometer is used to evaluate the potential application of the nanopillars for on-site diagnostics. It avoids the need for sophisticated tabletop instruments yet provides high-precision molecular specificity outside specialized laboratories. The 3D nanopillar substrates show excellent molecular detection limits at 10-15 M concentrations when tested with a handheld Raman spectrometer. The uniqueness of the 3D nanopillar features with the formation of a high density of hot-spots and one-step nanofabrication methods provide a platform to unravel on-site diagnostics with cost-effective approaches.

Metasurface-generated holograms have emerged as a unique platform for arbitrarily shaping the reflected/transmitted wavefronts with the advantages of subwavelength large pixel sizes and multiple information channels. However, achieving multiple holographic images with large operation bandwidths is a rather complicated and arduous issue due to the dissimilar dispersion of all meta-atoms involved. In this work, we design and experimentally demonstrate single-celled metasurfaces to realize broadband and spin-multiplexed holograms, whose phase modulation is based only on the geometric phase supplied by a judiciously designed high-performance nanoscale half-wave plate operating in reflection. Four different multiplexing strategies are implemented, and the resulting holograms are systemically assessed and compared with respect to background levels, image fidelities, holograms efficiencies, and polarization conversion ratios. Our work complements the methodologies available for designing multiplexed meta-holograms with versatile functionalities.

Thermophotovoltaic (TPV) cells convert thermally emitted photons into electrical power using photovoltaic (PV) detectors. To realize highly efficient thermal energy harvesting using TPV conversion, high-temperature stable spectrally-selective emitters are needed. The deployment of TPV technology lags behind conventional solar-PV technology due to the lack of large-scale fabrication of efficient thermal emitters, which would preferentially emit in the PV cell absorption band. In this work, we demonstrate a simple large-area nanofabrication method based on the hole-mask colloidal lithography and sputtering, which allows one to fabricate tungsten (W) nanodisc spectrally-selective emitters (consisting of a metal-insulator-metal configuration) with a high emissivity below the InGaAsSb PV-cell cut-off wavelength of 2.25 mu m and a gradually decreasing emissivity (down to < 10%) in the mid-infrared region. Frequency-domain time-domain (FDTD) simulations reveal that the spectral selectivity is achieved due to the localized surface plasmon resonance of W nanodiscs strongly influenced by the insulator thickness. Importantly, the W emitters show thermal stability at temperatures of up to 1100 degrees C, and emissivity invariance to changes in polarization and incidence angles up to 65 degrees. This work represents a significant step towards the realization of high-temperature stable efficient thermal emitters by a facile and costeffective fabrication method, thereby promoting the implementation of photonic/plasmonic thermal emitters in the next-generation thermal energy harvesting systems. The method proposed in this study holds potential for scalability; however, empirical evidence to demonstrate this scalability has not yet been established. Subsequent studies are needed to confirm the scalability of the proposed method and its extensive applicability.

Topological defects in solid-state materials are crystallographic imperfections that local perturbations cannot remove. Owing to their nontrivial real-space topology, topological defects such as dislocations and disclinations could trap anomalous states associated with nontrivial momentum-space topology. The real-space topology of dislocations and discli-nations can be characterized by the Burgers vector B , which is usually a fixed fraction and integer of lattice constant in solid-state materials. Here we show that in a dielectric photonic crystal – an artificial crystalline structure, it is possible to tune B continuously as a function of the dielectric constant of dislocations. Through this unprecedented tunability of B , we achieve proper controls of topological interfacial states, i.e., reversal of their helici-ties. Based on this fact, we propose a topological optical switch controlled by the dielectric constant of the tunable dislocation. Our results shed light on the interplay of real and reciprocal space topologies and offer a new scheme to implement scalable and tunable robust topological waveguides in dielectric photonic crystals.

Electrically connected optical metasurfaces with high efficiencies are crucial for developing spatiotemporal metadevices with ultrahigh spatial and ultrafast temporal resolutions. While efficient metal-insulator-metal (MIM) metasurfaces containing discretized meta-atoms require additional electrodes, Babinet-inspired slot-antenna-based plasmonic metasurfaces suffer from low efficiencies and limited phase coverage for copolarized optical fields. Capitalizing on the concepts of conventional MIM and slot-antenna metasurfaces, we design and experimentally demonstrate a new type of optical reflective metasurfaces consisting of mirror-coupled slot antennas (MCSAs). By tuning the dimensions of rectangular-shaped nanoapertures atop a dielectric-coated gold mirror, we achieve efficient phase modulation within a sufficiently large range of 320 deg and realize functional phase-gradient metadevices for beam steering and beam splitting in the near-infrared range. The fabricated samples show (22 % +/- 2 % ) diffraction efficiency for beam steering and (17 % +/- 1 % ) for beam splitting at the wavelength of 790 nm. The considered MCSA configuration, dispensing with auxiliary electrodes, offers an alternative and promising platform for electrically controlled reflective spatiotemporal metasurfaces.