Realizing personalized intelligence faces a core dilemma: sending user history to centralized large language models raises privacy concerns, while on-device small language models lack the reasoning capacity required for high-quality generation. Our pilot study shows that purely local enhancements remain insufficient to reliably bridge this gap. We therefore propose SpecSteer, an asymmetric collaborative inference framework that synergizes private on-device context with cloud-scale reasoning. SpecSteer casts collaboration as Bayesian knowledge fusion and repurposes speculative decoding as a distributed alignment protocol, yielding a Draft–Verify–Recover pipeline: the on-device model drafts personalized sequences; the cloud validates via a ratio-based mechanism that decouples reasoning verification from private context, filtering logical flaws without accessing raw user context; upon rejection, a steering recovery injects local intent during correction. Experiments demonstrate that SpecSteer successfully closes the reasoning gap and achieves superior personalized generation performance, while delivering a 2.36x speedup over standard baselines.
Adaptive Retrieval-Augmented Generation aims to mitigate the interference of extraneous noise by dynamically determining the necessity of retrieving supplementary passages. However, as Large Language Models evolve with increasing robustness to noise, the necessity of adaptive retrieval warrants re-evaluation. In this paper, we rethink this necessity and propose AdaRankLLM, a novel adaptive retrieval framework. To effectively verify the necessity of adaptive listwise reranking, we first develop an adaptive ranker employing a zero-shot prompt with a passage dropout mechanism, and compare its generation outcomes against static fixed-depth retrieval strategies. Furthermore, to endow smaller open-source LLMs with this precise listwise ranking and adaptive filtering capability, we introduce a two-stage progressive distillation paradigm enhanced by data sampling and augmentation techniques. Extensive experiments across three datasets and eight LLMs demonstrate that AdaRankLLM consistently achieves optimal performance in most scenarios with significantly reduced context overhead. Crucially, our analysis reveals a role shift in adaptive retrieval: it functions as a critical noise filter for weaker models to overcome their limitations, while serving as a cost-effective efficiency optimizer for stronger reasoning models.
Generative models offer a promising paradigm for the final stage reranking in multi-stage recommender systems, with the ability to capture inter-item dependencies within reranked lists. However, their practical deployment still faces two key challenges: (1) an inherent conflict between achieving high generation quality and ensuring low-latency inference, making it difficult to balance the two, and (2) insufficient interaction between user and item features in existing methods. To address these challenges, we propose a novel Personalized Semi-Autoregressive with online knowledge Distillation (PSAD) framework for reranking. In this framework, the teacher model adopts a semi-autoregressive generator to balance generation quality and efficiency, while its ranking knowledge is distilled online into a lightweight scoring network during joint training, enabling real-time and efficient inference. Furthermore, we propose a User Profile Network (UPN) that injects user intent and models interest dynamics, enabling deeper interactions between users and items. Extensive experiments conducted on three large-scale public datasets demonstrate that PSAD significantly outperforms state-of-the-art baselines in both ranking performance and inference efficiency.
Chain-of-Thought (CoT) reasoning is widely used to improve LLM performance, and recent foundation recommender models adopt it by generating textual reasoning before predicting target items represented by Semantic IDs (SIDs). However, we observe that enabling thinking mode in models such as OpenOneRec can degrade recommendation quality by up to 25
Functional magnetic resonance imaging (fMRI) enables noninvasive investigation of brain function, while short clinical scan durations, arising from human and non-human factors, usually lead to reduced data quality and limited statistical power for neuroimaging research. In this paper, we propose BrainCast, a novel spatio-temporal forecasting framework specifically tailored for whole-brain fMRI time series forecasting, to extend informative fMRI time series without additional data acquisition. It formulates fMRI time series forecasting as a multivariate time series prediction task and jointly models temporal dynamics within regions of interest (ROIs) and spatial interactions across ROIs. Specifically, BrainCast integrates a Spatial Interaction Awareness module to characterize inter-ROI dependencies via embedding every ROI time series as a token, a Temporal Feature Refinement module to capture intrinsic neural dynamics within each ROI by enhancing both low- and high-energy temporal components of fMRI time series at the ROI level, and a Spatio-temporal Pattern Alignment module to combine spatial and temporal representations for producing informative whole-brain features. Experimental results on resting-state and task fMRI datasets from the Human Connectome Project demonstrate the superiority of BrainCast over state-of-the-art time series forecasting baselines. Moreover, fMRI time series extended by BrainCast improve downstream cognitive ability prediction, highlighting the clinical and neuroscientific impact brought by whole-brain fMRI time series forecasting in scenarios with restricted scan durations.
Agentic LLM pipelines face escalating inference costs as context accumulates across retrieval, tool use, and multi-turn interactions. To control latency, deployments routinely compress inputs, but this degrades task accuracy. Speculative decoding (SD) accelerates generation losslessly, yet it assumes the drafter and verifier share an identical context, preventing SD from resolving the accuracy-overhead trade-off. We propose AsymSpec, an asymmetric speculative decoding framework that breaks this symmetry: a lightweight drafter reads the full input while the large verifier operates on the compressed view. The drafter steers the verifier via a contrastive δ-fusion of logits, modulated by a divergence-aware acceptance gate that preserves verification stability and high draft acceptance rates. Evaluated across four agentic capabilities and two end-to-end agent benchmarks, AsymSpec reaches ≈ 90% of full-context accuracy on average, delivering 1.3–1.7× throughput speedups at 0.2–0.3× the compute cost on isolated text capabilities. These results show that asymmetric context access yields substantial gains precisely when compression discards critical reasoning signals.
The effectiveness of modern visual representation learning and autoregressive models critically depends on vector quantization (VQ), which discretizes continuous feature representations using a learnable codebook. Despite its widespread use, existing VQ methods often suffer from training instability and codebook collapse, arising from gradient mismatch induced by the straight-through estimator and the under-utilization of code vectors. In this work, we show that both issues can be traced to a fundamental mismatch between the distributions of feature vectors and code vectors, leading to inefficient representation and information loss. Building on this observation, we propose a distributional matching framework for vector quantization. We introduce principled criteria for desirable VQ behavior and demonstrate through theoretical analysis and empirical evaluation that aligning feature and code vector distributions provides a unifying mechanism for mitigating training instability and codebook collapse. We instantiate this framework using a Wasserstein-based objective with an efficient closed-form under a mild Gaussian approximation, and further show that a nonparametric alternative based on maximum mean discrepancy yields comparable performance. Extensive experiments on visual tokenization benchmarks support the effectiveness and robustness of the proposed approach.
Modern recommendation systems primarily rely on attention mechanisms with quadratic complexity, which limits their ability to handle long user sequences and slows down inference. While linear attention is a promising alternative, existing research faces three critical challenges: (1) temporal signals are often overlooked or integrated via naive coupling that causes mutual interference between temporal and semantic signals while neglecting behavioral periodicity; (2) insufficient positional information provided by existing linear frameworks; and (3) a primary focus on short sequences and shallow architectures. To address these issues, we propose FuXi-Linear, a linear-complexity model designed for efficient long-sequence recommendation. Our approach introduces two key components: (1) a Temporal Retention Channel that independently computes periodic attention weights using temporal data, preventing crosstalk between temporal and semantic signals; (2) a Linear Positional Channel that integrates positional information through learnable kernels within linear complexity. Moreover, we demonstrate that FuXi-Linear exhibits a robust power-law scaling property at a thousand-length scale, a characteristic largely unexplored in prior linear recommendation studies. Extensive experiments on sequences of several thousand tokens demonstrate that FuXi-Linear outperforms state-of-the-art models in recommendation quality, while achieving up to 10× speedup in the prefill stage and up to 21× speedup in the decode stage compared to competitive baselines. Our code has been released in a public repository https://github.com/USTC-StarTeam/fuxi-linear.
Although Large Audio-Language Models (LALMs) deliver state-of-the-art (SOTA) performance, they frequently suffer from hallucinations, e.g. generating text not grounded in the audio input. We analyze these grounding failures and identify a distinct taxonomy: Event Omission, False Event Identity, Temporal Relation Error, and Quantitative Temporal Error. To address this, we introduce the AHA (Audio Hallucination Alignment) framework. By leveraging counterfactual hard negative mining, our pipeline constructs a high-quality preference dataset that forces models to distinguish strict acoustic evidence from linguistically plausible fabrications. Additionally, we establish AHA-Eval, a diagnostic benchmark designed to rigorously test these fine-grained temporal reasoning capabilities. We apply this data to align Qwen2.5-Omni. The resulting model, Qwen-Audio-AHA, achieves a 13.7
Modern digital services have evolved into indispensable tools, driving the present large-scale information systems. Yet, the prevailing platform-centric model, where services are optimized for platform-driven metrics such as engagement and conversion, often fails to align with users' true needs. While platform technologies have advanced significantly-especially with the integration of large language models (LLMs)-we argue that improvements in platform service quality do not necessarily translate to genuine user benefit. Instead, platform-centric services prioritize provider objectives over user welfare, resulting in conflicts against user interests. This paper argues that the future of digital services should shift from a platform-centric to a user-centric agent. These user-centric agents prioritize privacy, align with user-defined goals, and grant users control over their preferences and actions. With advancements in LLMs and on-device intelligence, the realization of this vision is now feasible. This paper explores the opportunities and challenges in transitioning to user-centric intelligence, presents a practical device-cloud pipeline for its implementation, and discusses the necessary governance and ecosystem structures for its adoption.
Long-horizon LLM agents require memory systems that remain accurate under fixed context budgets. However, existing systems struggle with two persistent challenges in long-term dialogue: (i) disconnected evidence, where multi-hop answers require linking facts distributed across time, and (ii) state updates, where evolving information (e.g., schedule changes) creates conflicts with older static logs. We propose AriadneMem, a structured memory system that addresses these failure modes via a decoupled two-phase pipeline. In the offline construction phase, AriadneMem employs entropy-aware gating to filter noise and low-information message before LLM extraction and applies conflict-aware coarsening to merge static duplicates while preserving state transitions as temporal edges. In the online reasoning phase, rather than relying on expensive iterative planning, AriadneMem executes algorithmic bridge discovery to reconstruct missing logical paths between retrieved facts, followed by single-call topology-aware synthesis. On LoCoMo experiments with GPT-4o, AriadneMem improves Multi-Hop F1 by 15.2% and Average F1 by 9.0% over strong baselines. Crucially, by offloading reasoning to the graph layer, AriadneMem reduces total runtime by 77.8% using only 497 context tokens. The code is available at https://github.com/LLM-VLM-GSL/AriadneMem.
Recently, with the rapid advancements in Large Language Models (LLMs), LLM-based Open-domain Question Answering (OpenQA) methods have reaped the benefits of emergent understanding and answering capabilities enabled by massive parameters compared to traditional methods. However, most of these methods encounter two critical challenges: how to integrate knowledge into LLMs effectively and how to adaptively generate results with specific answer formats. To address these challenges, we propose a novel framework, which aims to improve the OpenQA performance by exploring knowledge integration and controllable generation on LLMs simultaneously, namely GenKI. Specifically, we first train a dense passage retrieval model to retrieve associated knowledge from a given knowledge base. Subsequently, we introduce a novel knowledge integration model that incorporates the retrieval knowledge into instructions during fine-tuning to intensify the model. Furthermore, to enable controllable generation in LLMs, we leverage a certain fine-tuned LLM and an ensemble framework based on text consistency incorporating all coherence, fluency, and answer format assurance. Finally, extensive experiments conducted on three datasets with diverse answer formats demonstrate the effectiveness of GenKI with comparison of state-of-the-art baselines. Moreover, ablation studies have disclosed a linear relationship between the frequency of retrieved knowledge and the model's ability to recall knowledge accurately with the ground truth. Tests focusing on the out-of-domain scenario and knowledge base independence scenario have further affirmed the robustness and controllable capability of GenKI. Our code of GenKI is available at https://github.com/USTC-StarTeam/GenKI.
In industrial-scale recommender systems, the continuous accumulation of user interactions gives rise to large-scale and heterogeneous behavior sequences, posing significant challenges to both computational efficiency and storage scalability. To support user lifelong behavior modeling (ULBM) under stringent industrial constraints, extensive research efforts have been devoted to balancing efficiency and effectiveness. This survey presents a systematic review of ULBM methods that have been widely adopted in real-world recommender systems and demonstrated substantial practical value. We organize existing studies around the central industrial challenge of efficiency–effectiveness trade-offs. Specifically, efficiency is examined from both algorithmic and system-level perspectives, while effectiveness is discussed in terms of enhanced modeling of intrinsic sequential dependencies and the incorporation of external contextual signals. We further highlight how the synergy between efficiency-oriented and effectiveness-oriented designs continually improves the return on investment in large-scale recommender systems. Finally, we summarize publicly available datasets for ULBM research and outline several promising directions for future investigation, aiming to provide insights and guidance for subsequent studies. To support ongoing research, we maintain a living repository tracks emerging literature and reference implementations: https://github.com/Kuaishou-RecModel/Survey of ULBM
Faithful chart generation in real-world data-science workflows requires grounding visualizations in scattered evidence, computing chart-ready quantities, and rendering them accurately. Modern LLMs can produce visually plausible, instruction-compliant charts, yet data-level hallucinations remain difficult to detect in long, noisy, and multimodal contexts. To measure this gap, we introduce DEEPCHART, an expert-annotated benchmark of 1,482 task-conditioned chart-generation instances drawn from real-world scientific papers, financial filings, and ecosystem reports. DEEPCHART formulates chart generation as an Extract–Reason–Visualize pipeline and evaluates source-data extraction, derived-data reasoning, and chart rendering stage by stage. Experiments with state-of-the-art models show that visually plausible charts often conceal data-level hallucinations, with extraction and reasoning errors common in realistic long and multimodal settings. These findings suggest that larger context windows alone are insufficient; faithful chart generation also requires reliable evidence extraction and quantitative reasoning before rendering. Our benchmark and associated resources are available at https://github.com/tangdouer1005/DeepChart.
To address the issues in existing PCB defect detection models, including insufficient capability for capturing small defects, weaker global feature modeling, and inadequate multi-scale feature fusion, this paper proposes a C2f-FPN-PAN++-Mamba model based on an improved YOLOv8n. The Mamba state-space model is embedded into the C2f module to construct a C2f-Mamba feature extraction unit, which, while retaining the local perception capability of convolution, enhances long-range dependency modeling, accurately capturing global semantic information of subtle defects in complex backgrounds and significantly improving the model's feature representation ability for small defects. Meanwhile, an FPN-PAN++ enhanced feature fusion structure is introduced, achieving efficient complementary interaction between high and low-level features through bidirectional cross-scale feature aggregation and path augmentation, thereby strengthening the model's robustness in identifying multi-scale and multi-form defects. Finally, the C2f-Mamba and FPN-PAN++ are organically integrated, improving global modeling and multi-scale fusion capabilities while maintaining lightweight computational efficiency, effectively reducing the miss and false detection rates of small defects. Experimental results indicate that, compared with the original YOLOv8n model, the proposed method achieves significant performance improvements in PCB defect detection tasks. On the PCB defect dataset, the model's precision increased from 96.4% to 98.5%, recall from 94.6% to 98.4%, and mAP@0.5 from 97.2% to 98.8%, with the mAP@0.5:0.95 metric, reflecting multi-scale detection performance, rising dramatically from 57.5% to 62.5%. Experiments demonstrate that this method effectively enhances detection capability for small and complex defects while preserving the advantages of a lightweight model and high inference speed, providing a reliable technical solution for high-precision, real-time PCB defect detection in industrial scenarios.
Interactive recommendation is a typical information-seeking task that allows users to interactively express their needs through natural language and obtain personalized recommendations. Large language model-powered (LLM-powered) agents have become a new paradigm in interactive recommendations, effectively capturing users' real-time needs and enhancing personalized experiences. However, due to limited planning and generalization capabilities, existing formulations of LLM-powered interactive recommender agents struggle to effectively address diverse and complex user intents, such as intuitive, unrefined, or occasionally ambiguous requests. To tackle this challenge, we propose a novel Thought-Augmented Interactive Recommender Agent system (TAIRA) that addresses complex user intents through distilled thought patterns. Specifically, TAIRA is designed as an LLM-powered multi-agent system featuring a manager agent that orchestrates recommendation tasks by decomposing user needs and planning subtasks, with its planning capacity strengthened through Thought Pattern Distillation (TPD), a thought-augmentation method that extracts high-level thoughts from the agent's and human experts' experiences. Through comprehensive experiments conducted across multiple designed datasets, TAIRA exhibits significantly enhanced performance compared to existing methods. Notably, TAIRA's thought augmentation strategies endow the agent system with the ability to solve complex tasks while generalizing effectively on novel tasks, validating its potential as a foundational framework for agent systems, particularly in complex user intent scenarios.
While collaborative forecasting on distributed time series is highly desirable, directly pooling localized datasets is often impractical due to data sharing constraints. Federated learning offers a promising alternative, yet conventional federated learning algorithms require homogeneous model architectures, which are incompatible with the structural discrepancies, such as unaligned temporal resolutions and mismatched variable channels, commonly observed across decentralized nodes. To bridge this gap, we introduce PiXTime, a novel Transformer-based framework designed to natively accommodate and leverage structurally heterogeneous temporal data. At its core, PiXTime adopts a parameter-decoupling architecture, strategically partitioning the model into localized personalized modules and a globally aggregated shared backbone. Specifically, node-specific local modules act as dimensional adapters, projecting raw sequences of diverse lengths into a unified representation space. Concurrently, a globally synchronized VE Table injects consistent categorical identities into the feature space, allowing the shared backbone to collaboratively learn and generalize representations across inconsistent variable distributions. Comprehensive evaluations on multiple benchmarks demonstrate that PiXTime achieves state-of-the-art performance in heterogeneous federated environments, while maintaining robust superiority in standard homogeneous and centralized forecasting settings.
Generative Recommendation (GR) has excelled by framing recommendation as next-token prediction. This paradigm relies on Semantic IDs (SIDs) to tokenize large-scale items into discrete sequences. Existing GR approaches predominantly generate SIDs via Residual Quantization (RQ), where items are encoded into embeddings and then quantized to discrete SIDs. However, this paradigm suffers from inherent limitations: 1) Objective misalignment and semantic degradation stemming from the two-stage compression; 2) Error accumulation inherent in the structure of RQ. To address these limitations, we propose UniSID, a Unified SID generation framework for generative advertisement recommendation. Specifically, we jointly optimize embeddings and SIDs in an end-to-end manner from raw advertising data, enabling semantic information to flow directly into the SID space and thus addressing the inherent limitations of the two-stage cascading compression paradigm. To capture fine-grained semantics, a multi-granularity contrastive learning strategy is introduced to align distinct items across SID levels. Finally, a summary-based ad reconstruction mechanism is proposed to encourage SIDs to capture high-level semantic information that is not explicitly present in advertising contexts. Experiments demonstrate that UniSID consistently outperforms state-of-the-art SID generation methods, yielding up to a 4.62