AbstractWatershed sediment yield commonly increases after wildfire, often causing negative impacts to downstream infrastructure and water resources. Post‐fire erosion is important to understand and quantify because it is increasingly placing water supplies, habitat, communities, and infrastructure at risk as fire regimes intensify in a warming climate. However, measurements of post‐fire sediment mobilization are lacking from many regions. We measured sediment yield from a forested, heavily managed 25.4‐km2 watershed in the western Sierra Nevada, California, over 2 years following the 2021 Caldor Fire, by repeat mapping of a reservoir where sediment accumulated from terrain with moderate to high soil burn severity. Sediment yield was less than the geochronology‐derived long‐term average in the first year post‐fire (conservatively estimated at 21.8–28.0 t/km2), low enough to be difficult to measure with uncrewed airborne system (UAS) and bathymetric sonar survey methods that are most effective at detecting larger sedimentary signals. In the second year post‐fire the sediment delivery was 1,560–2,010 t/km2, an order of magnitude above long‐term values, attributable to greater precipitation and intensive salvage logging. Hillslope erosion simulated by the Water Erosion Prediction Project (WEPP) model overestimated the measured amount by a factor of 90 in the first year and in the second year by a factor (1.9) that aligned with previously determined model performance in northern California. We encourage additional field studies, and validation of erosion models where feasible, to further expand the range of conditions informing post‐fire hazard assessments and management decisions.

Abstract It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high‐resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States‐Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide‐related features, including 63 discrete slide deposits with debris and >1,400 slide‐related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea‐level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low‐gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small‐scale failures on tectonically steepened slopes.

Ozette Lake is an ~100-m-deep coastal lake located along the outer coast of the Olympic Peninsula (Washington, USA); it is situated above the locked portion of the northern Cascadia megathrust but also relatively isolated from active crustal faults and intraslab earthquakes. Here we present a suite of geophysical and geological evidence for earthquake-triggered mass transport deposits (MTDs) and related turbidite deposition in Ozette Lake since ca. 14 ka. Comprehensive high-resolution bathymetry data, seismic reflection profiles, and sediment cores are used to characterize the post-glacial stratigraphic framework and examine paleoseismic evidence in the lacustrine sediments. Stacked sequences of MTDs along the steep eastern flanks of the lake appear to grade basin-ward from thick, chaotic, blocky masses to thin, parallel-bedded turbidite beds. The discrete turbidite event layers are separated by fine-grained (silt and clay) lake sedimentation. The event layers are observed throughout the lake, but the physical characteristics of the deposits vary considerably depending on proximity to primary depocenters, steep slopes, and subaqueous deltas. A total of 30–34 event deposits are observed in the post-glacial record. Radiometric dating was used to reconstruct a detailed sedimentation history over the last ~5.5 k.y., develop an age model, and estimate the recurrence (365–405 yr) for the most recent 12 event layers. Based on sedimentological characteristics, temporal overlap with other regional paleoseismic chronologies, and recurrence estimates, at least 10 of the dated event layers appear to be sourced from slope failures triggered by intense shaking during megathrust ruptures; the recurrence interval for these 10 events is 440–560 yr. Thus, Ozette Lake contains one of the longest and most robust geological records of repeated shaking along the northern Cascadia subduction zone.

First posted September 6, 2023 For additional information, contact: Pacific Coastal and Marine Science CenterU.S. Geological Survey2885 Mission St.Santa Cruz, CA 95060 Coastal and Marine Ecological Classification Standard geoform, substrate, and biotic component geographic information system products were developed for the California State waters of south-central California in the region offshore of Morro Bay. The study was motivated by interest in development of offshore wind-energy capacity and infrastructure in Federal waters offshore. The Bureau of Ocean Energy Management, in coordination with the State of California and many other members of the California Intergovernmental Renewable Energy Task Force, issued calls for information in 2018 for the study area offshore of Morro Bay, California. The study area is adjacent to a nuclear power plant (currently scheduled for decommissioning) with a developed electric grid connection, and in an area of high wind resource potential. The Bureau of Ocean Energy Management is the lead agency responsible for planning and leasing in the U.S. Exclusive Economic Zone and funded this project to assess baseline conditions of, and the potential effects on, the seafloor environment. This project, carried out by the U.S. Geological Survey, resulted in three data releases for individual map blocks that are part of the California State Waters Map Series: (1) Offshore of Point Estero, (2) Offshore of Morro Bay, and (3) Offshore of Point Buchon. The study area consists of 341 square kilometers (km2) of multibeam echo sounder (MBES) data acquired by Fugro, Inc., in 2010. Towed camera-sled video was acquired in 2012 to supervise the classification of the MBES data into habitats. There were 935 annotations of organisms and habitat made from 22 video transects. Using video observations of habitat as ground truth, derivatives of the MBES data were classified into 3 seafloor character types (hard-rugged, hard-flat, and soft-flat), 25 modifier groups, and 9 geoforms. The study area substrate is predominantly soft-flat sediment (mud and fine sand) covering 191.3 km2 (56.1 percent) of the area. Hard-flat substrate areas, predominantly coarse sediment in scour depressions, cover 52.2 km2 (15.3 percent) of the study area. The hard-rugged substrate areas are primarily outcrops of layered sedimentary bedrock and constitute 97.5 km2 of the study area (28.6 percent). After classification of bathymetry and backscatter raster images according to substrate, false-positive hard areas produced by noise artifacts were removed by manual editing. Nine geoforms were then identified in the analysis. The predominant geoforms mirror the seafloor character results, shelf geoforms (flat areas covered in soft sediment), rock outcrop geoforms (hard, rugged areas), and scour depression geoforms (flat areas covered in coarse sediment formed by bottom currents).

First posted February 7, 2023 For additional information, contact: Pacific Coastal and Marine Science CenterU.S. Geological Survey2885 Mission St.Santa Cruz, CA 95060 This two-sheet publication displays a high-resolution colored shaded-relief bathymetric map (sheet 1) and orthomosaic (sheet 2) of part of the Lake Tahoe floor in California generated from a U.S. Geological Survey towed surface vehicle with multiple downward-looking underwater cameras. The system is named the Structure-from-Motion Quantitative Underwater Imaging Device with Five Cameras (SQUID-5). The cameras were synchronized with each other and with a survey-grade Global Navigation Satellite System. A total of 42,939 photographs were collected with nearly complete overlapping coverage of an area approximately 250 meters by 250 meters. A digital terrain model and an orthomosaic were generated from the overlapping photographs using Structure-from-Motion and photogrammetry techniques. Gaps are present in the bathymetry data owing to data-collection or -processing artifacts. These two sheets display the very fine details of the lake floor mapped using SQUID-5.

First posted November 2, 2022 For additional information, contact: Director, Woods Hole Coastal and Marine Science CenterU.S. Geological Survey384 Woods Hole RoadQuissett CampusWoods Hole, MA 02543–1598 In 2015, U.S. Geological Survey scientists in collaboration with scientists from other institutions began a study of the Queen Charlotte fault—the first systematic study of the fault in more than three decades. The primary goal of the study was to gain a better understanding of the earthquake, tsunami, and underwater-landslide hazards throughout southeastern Alaska, as well as gather data to develop geologic models that can be applied to similar plate boundaries around the globe, such as the San Andreas fault system in southern California, the Alpine fault in New Zealand, and the North Anatolian fault in Turkey. A bathymetric terrain model was compiled from six different multibeam surveys of the previously unmapped Queen Charlotte fault offshore of southeastern Alaska and Haida Gwaii archipelago.

First posted April 5, 2022 For additional information, contact: Pacific Coastal and Marine Science CenterU.S. Geological Survey2885 Mission St.Santa Cruz, CA 95060 Coastal and Marine Ecological Classification Standard (CMECS) geoform, substrate, and biotic component geographic information system (GIS) products were developed for the U.S. Exclusive Economic Zone (U.S. EEZ) of south-central California in the region of Santa Lucia Bank motivated by interest in development of offshore wind-energy capacity and infrastructure. The Bureau of Ocean Energy Management (BOEM), in coordination with the State of California and many other members of the California Task Force, issued calls for information in 2018 for the study area offshore of Morro Bay, California. The study area is in depths of 500 to 1,200 meters (m) and adjacent to a decommissioned nuclear power plant with a developed electric grid connection, and in an area of high wind resource. BOEM is the lead agency responsible for planning and leasing in the U.S. EEZ and funded this project to assess baseline conditions of, and the potential effects on, the seafloor environment. This project, carried out by the U.S. Geological Survey (USGS), resulted in three reports: one on biological analysis of seafloor video data, one on analysis of the geologic framework and hazards, and this report on seafloor habitat. The study area consists of 8,424 square kilometers (km2) of multibeam echo sounder (MBES) data acquired during five surveys from 2016 to 2019. Remotely operated vehicle (ROV) video was acquired in 2019 to supervise the classification of the MBES data into habitats. Derivatives of the MBES data were classified into 16 unique biotopes, 6 substrate types, 28 modifier groups, and 22 geoforms. The study area substrate is predominantly soft sediment (mud and fine sand) covering 7,804 km2 (92.7 percent) of the area. Mixed substrate areas on rocky banks, channel scarps, and the shelf break comprise 404 km2 (4.8 percent) of the study area. Hard substrate areas are found predominantly on the tops and flanks of banks and on bank ridges that separate canyons incising the banks. Hard substrates comprise 211 km2 of the study area (2.5 percent). After the bathymetry and backscatter raster images (rasters) were classified, manual editing was also done to remove noise artifacts. This effort was not completely successful and there are numerous erroneous small areas in the rasters that have been passed on to the CMECS polygon product. Nearly 120,000 annotations of organisms and their habitat were made from 25 video transects selected from 185 hours of ROV video. In total, 2,714 km2 of seafloor were successfully assigned to biotopes. Some biotopes were assigned to separate areas spatially distant from the transects that define the biotope. Expected relations between physical habitat and biota such as the number of species and the substrate induration and rugosity were verified. Slope is typically a predictive variable and was used in the classification of habitat, but the ground truth used for biotic component analysis included very little steeply sloping area. Ground-truth ROV operations were reduced by the sea state; additional ground truth could improve the biotic results and increase confidence in the spatial distribution of classifications reported here.

First posted August 16, 2022 For additional information, contact: Pacific Coastal and Marine Science CenterU.S. Geological Survey2885 Mission St.Santa Cruz, CA 95060 The Carr wildfire began on July 23, 2018, and burned almost 300,000 acres (approximately half on Federal lands) in northern California during the subsequent 6-week period. Over 97 percent of the area within Whiskeytown National Recreation Area, California, burned during the 2018 Carr wildfire, including the entire landscape that surrounds and drains into Whiskeytown Lake. Shortly after the Carr wildfire ended, the U.S. Geological Survey began investigations into the landscape responses, such as changes in erosion and sediment deposition, that occurred after the fire. This study focused on the collection and processing of bathymetric data and onshore aerial imagery in and around Whiskeytown Lake, California, to support wildfire science after the fire.

Abstract Wildfire risk has increased in recent decades over many regions, due to warming climate and other factors. Increased sediment export from recently burned landscapes can jeopardize downstream infrastructure and water resources, but physical landscape response to fire has not been quantified for some at‐risk areas, including much of northern California, USA. We measured sediment yield from three watersheds (13–29 km2) that drain to Whiskeytown Lake, California, within the area burned by the 2018 Carr Fire. Structure‐from‐Motion photogrammetry on aerial images combined with sonar bathymetric mapping of submerged areas indicated first‐year post‐fire sediment yields of 4,080 ± 598 t/km2 (Brandy Creek), 2,700 ± 527 t/km2 (Boulder Creek), and 305 ± 58.0 t/km2 (Whiskey Creek)—some of the first post‐fire yields measured in northern California and 64, 42, and 4.8 times greater than pre‐fire yields, respectively. These were measured during a wet year and resulted largely from rilling erosion and fluvial sediment transport, without post‐fire debris flows. Rilling preferentially developed in contact with dirt roads, aided by thin soils and exposed bedrock, and on slopes vegetated by chaparral pre‐fire. The second post‐fire year (a dry year) was characterized by fluvial reworking and delta progradation of the first‐year deposits and relatively little new sediment export. First‐year sedimentation of 111,000 m3 represented minor loss of storage capacity in Whiskeytown Lake but would be detrimental to smaller reservoirs; in general, increased sediment yields from western US watersheds as fire and extreme rainfall increase will likely pose risks to water quality and storage.

First posted July 30, 2021 For additional information, contact: Pacific Coastal and Marine Science CenterU.S. Geological SurveyPacific Coastal and Marine Science Center2885 Mission St.Santa Cruz, CA 95060 The California Continental Borderland is the complex continental margin in southern California that extends from Point Conception southward into northern Baja California (Fisher and others, 2009). This colored shaded-relief bathymetry map of the northern continental borderland in southern California was generated primarily from multibeam-echosounder data collected by the University of Washington in 2016, the Ocean Exploration Trust-Nautilus Exploration Program in 2015–17, and the National Oceanic and Atmospheric Administration in 2017. These datasets were processed in part by the U.S. Geological Survey. Additional smaller amounts of publicly available multibeam-bathymetry data collected by other federal and local agencies, academic institutions, and private firms were also incorporated into this map. Since the production of this map, other multibeam-bathymetry data have been collected in this region.

Linking fault behavior over many earthquake cycles to individual earthquake behavior is a primary goal in tectonic geomorphology, particularly across an entire plate boundary. Here, we examine the 1150-km-long, right-lateral Queen Charlotte-Fairweather fault system using comprehensive multibeam bathymetry data acquired along the Queen Charlotte Fault (QCF) offshore southeastern Alaska and western British Columbia. Fine-scale analysis of tectonic geomorphology allowed us to identify and reconstruct 184 strike-slip piercing points over a 630 km stretch of the QCF. Age constraints from glacial recession and offshore sedimentation patterns yield a consistent slip-rate of ∼50–57 mm/yr since ∼17–12 ka, the fastest rate for a continent-ocean strike-slip fault on Earth. These slip-rates equal or exceed estimates of Pacific-North America (PA-NA) relative motion from global plate reconstructions, indicating that PA-NA motion is highly localized. The QCF cuts the seafloor along a narrow and unusually straight trace for its entire length and multiple fault traces are observed only at local step-overs. The geometry and behavior of the QCF over many earthquake cycles is simple and typical of mature faults with relatively homogeneous stress fields. Since the QCF is the primary PA-NA plate boundary, we used the trace of the QCF to define the small circle path for relative plate motion and computed the associated Euler pole. Predicted along-strike obliquity variations based on the new pole agree with observed tectonic geomorphology and suggest that previous global plate reconstructions overestimated the degree of oblique convergence along the QCF. We also find that subtle, long-wavelength (75–150 km) bends and discrete step-overs appear to define the endpoints of M>7 earthquakes, suggesting that obliquity and resultant fault geometry may control rupture segmentation and asperity development. Lastly, the agreement between predicted obliquity and tectonic geomorphology along the entire length of QCF compelled a reevaluation of regional tectonic models. In the north, the eastern Yakatat Terrane appears to be translating northwest with the Pacific plate, and slip transferred from the QCF to the Fairweather Fault results in ∼20 mm/yr of convergence along the southern St. Elias mountains. In the south, we predict a reduced rate of convergence along the QCF west of Haida Gwaii (∼5–6 mm/yr of shortening, on average) relative to previous studies. Our results support a model for transpression and strike-slip partitioning along the edge of a hot and weak Pacific Plate, leading to crustal thickening and growth of the Queen Charlotte Terrace to the west of Haida Gwaii.

Fluid seepage along obliquely deforming plate boundaries can be an important indicator of crustal permeability and influence on fault-zone mechanics and hydrocarbon migration. The ∼850-km-long Queen Charlotte fault (QCF) is the dominant structure along the right-lateral transform boundary that separates the Pacific and North American tectonic plates offshore southeastern Alaska (USA) and western British Columbia (Canada). Indications for fluid seepage along the QCF margin include gas bubbles originating from the seafloor and imaged in the water column, chemosynthetic communities, precipitates of authigenic carbonates, mud volcanoes, and changes in the acoustic character of seismic reflection data. Cold seeps sampled in this study preferentially occur along the crests of ridgelines associated with uplift and folding and between submarine canyons that incise the continental slope strata. With carbonate stable carbon isotope (δ13C) values ranging from −46‰ to −3‰, there is evidence of both microbial and thermal degradation of organic matter of continental-margin sediments along the QCF. Both active and dormant venting on ridge crests indicate that the development of anticlines is a key feature along the QCF that facilitates both trapping and focused fluid flow. Geochemical analyses of methane-derived authigenic carbonates are evidence of fluid seepage along the QCF since the Last Glacial Maximum. These cold seeps sustain vibrant chemosynthetic communities such as clams and bacterial mats, providing further evidence of venting of reduced chemical fluids such as methane and sulfide along the QCF.

Detailed methods, figures, and analysis.

Improved understanding of the budget and retention of sediment in river deltas is becoming increasingly important to mitigate and plan for impacts expected with sea level rise. In this study, analyses of historical bathymetric change, sediment core stratigraphy, and modeling are used to evaluate the sediment budget and environmental response of the largest river delta in the U.S. Pacific Northwest to western land-use change beginning in ~1850. An estimated 142±28 M m3 of sediment accumulated offshore of the emergent Skagit River delta in Washington State between 1890 and 2014 and ~68% of which was found in sand deposits. The fraction of sediment retained in sand reservoirs represents 83% of the expected fluvial sand delivery over this time suggesting their potential utility to evaluate the relative contribution of different land uses to sediment runoff through time. A significantly higher ratio of sand retention to delivery during the period 1890–1939 coincided with extensive watershed denudation (clear-cut logging) and channel dredging, relative to the period 1940–2014, which was characterized by improved forest practices and sediment management to protect endangered species but also more extensive river channelization. Retention in the delta foreset of 78% of the sand delivered by the river between 1890 and 1939 was associated with extensive sediment bypassing and delta progradation that is shown to be 5–10x higher than rates over the Holocene. Comparable offshore sand retention over time and higher nearshore retention subsequent to 1940 after normalizing for the assumed reduction in sediment runoff with improved forest practices, suggests that channelization has continued to influence sediment export at a magnitude equivalent to the effects of early logging. Adverse impacts of the bypassing sediment regime to natural hazards risk and ecosystem management concerns are discussed, including the role of the lost sediment as a resource to mitigate subsiding coastal lands vulnerable to flood impacts. The sediment budget and coastal change analyses provide a framework for evaluating opportunities to achieve greater resilience across several sectors of coastal land use important in low-lying deltas worldwide.