Fabrication of tip position tracking sensor for high-bending minimally-invasive surgery robot
ISR(2013)
摘要
We described a fabrication process of thin 3-dimensional tip position tracking sensor. This sensor was composed of optical fibers molded by epoxy. A few fiber Bragg gratings of different pitches were written in each optical fiber, then the light of specified wavelength is reflected from each fiber Bragg grating. Because the optical fibers are molded not on the center of the fabricated sensor beam, the gratings get strain as the sensor beam is bent. Therefore, the curvature and bending direction is achieved, and final tip position of the sensor beam could be calculated from the data. To fabricate sensor beam of submillimiter diameter which is applicable to the high-curvature condition, Teflon tube and align jigs were fabricated and used. This sensor would enable tip position tracking without help of other imaging devices such as camera and lenses.
更多查看译文
关键词
medical robotics,teflon tube,epoxy,fabrication process,high curvature condition,fiber bragg gratings,bragg gratings,fabricated sensor beam,fibre optic sensors,bending direction,optical fibers,high bending minimally invasive surgery robot,tracking,3d tip position tracking sensor,sensors,shape sensor,optical fiber sensors,strain measurement,surgery
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络