Investigation of Removal Mechanism of Sapphire in Plasma Assisted Polishing

Single crystal sapphire is widely used as the material for precision equipments, due to its high hardness, chemical inertness and light transmission. However, it is difficult to obtain a scratch-free and damage-free sapphire surface with high-efficiency through traditional mechanical polishing or etching. We developed plasma assisted polishing (PAP) for the finishing of difficult-to-machine materials, such as silicon carbide, diamond, and sapphire. In this article, preliminary research results are showed about PAP applied to polishing of single crystal c-plane sapphire substrates. Combination of helium based atmospheric pressure water vapor plasma irradiation and silica abrasive polishing drastically increased removal rate of the sapphire c-plane. XPS measurements of the surfaces with and without irradiation of water vapor plasma revealed that alumina hydrate was formed by plasma irradiation at low temperature of less than 40°C. It is assumed that formation of alumina hydrate promoted the removal rate of sapphire.