Solution-Processed Pcdtbt Capped Low-Voltage Ingaznox Thin Film Phototransistors For Visible-Light Detection

The effects of visible-light detection based on solution processed poly[N-9 ''-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'benzothiadiazole) (PCDTBT) capped InGaZnOx (IGZO) phototransistors with Al2Ox serving as gate dielectric are investigated in this paper. The high-k dielectric is used to lower the device operating voltage down to 2V. Photons emitted from laser sources with the wavelengths (lambda) of 532 nm and 635 nm are absorbed through the layer of PCDTBT to generate electron-hole-pairs (EHPs). After the separation of EHPs, electrons are injected into IGZO layer through the p-n junction formed between the IGZO (n-type semiconductor) and the PCDTBT (p-type semiconductor). The photo-generated carriers boost the drain current of the transistors as well as bring about the negative threshold voltage shift. Significant enhanced detection performance is achieved under the laser wavelength of 532 nm. The highest photoresponsivity reaches up to 20 A/W, while the photoresponse rise time comes to 10 ms and the fall time comes to approximate 76 ms, which is much faster than trap assisted IGZO visible light detection. The fabricated phototransistors favor the application of visible-light detectors and/or optical switches. (C) 2015 AIP Publishing LLC.