Contact angle measurements on oxidized polymer surfaces containing water-soluble species

Advancing and receding contact angle measurements on polymer surfaces can be performed using a number of different methods. Ballistic deposition is a new method for both rapidly and accurately measuring the receding contact angle of water. In the ballistic deposition method, a pulsed stream of 0.15-mu L water droplets is impinged upon a surface. The water spreads across the surface and then coalesces into a single 1.8-mu L drop. High-speed video imaging shows that, on most surfaces, the water retracts from previously wetted material, thereby forming receding contact angles that agree with the receding angles measured by the Wilhelmy plate technique. The ballistic deposition method measures the receding angle within one second after the water first contacts the surface. This rapid measurement enables the investigation of polymer surface properties that are not easily probed by other wettability measurement methods. For example, meaningful contact angles of water can be obtained on the water-soluble low-molecular-weight oxidized materials (LMWOM) formed by the corona and flame treatment of polypropylene (PP) films. Use of the ballistic deposition method allows for a characterization of the wetting properties and an estimation of the surface energy components of LMWOM itself. Both corona- and flame-generated LMWOM have significant contact angle hysteresis, almost all of which is accounted for by the non-dispersive (polar) component of the surface rather than by the dispersive component. Surface heterogeneity is thus associated primarily with the oxidized functionalities added to the PP by the corona and flame treatments.