Outdoor Propagation Analysis Of Ultra Wide Band Signals

An ultra wide band (UWB) signal is defined as any radiation in which the 3-dB bandwidth is greater than 25% of the center frequency. UWB signals are characterized by extreme low powers and large bandwidths, which can be used for data, voice and video communication. Since UWB waveforms have very short time duration, they are relatively immune to multi-path cancellation effects. In this paper we test the performance of a simulation to model the propagation of an UWB signal in outdoor forested environment. The simulation uses a combination of Finite Difference Time Domain and ray tracing methods to simulate the UWB wave propagation. The model takes into consideration the dielectric constants of the materials of the trees and measures the signal strength for vertical and horizontal polarizations of the UWB antennas placed at various heights and distances from each other. The results of the simulation are compared to measurements obtained from tests conducted at a wooded area in Seneca Creek State Park, Gaithersburg, Maryland. It was observed that upto 150 ft distance between the transmitter and receiver, the horizontally polarized antenna system gave better signal-to-noise ratio, but at greater distances the vertically polarized antenna system gave a better signal-to-noise ration performance. Three dimensional plots of the signal strengths and the signal-to-noise ratio for various transmitter and receiver distances are plotted for the system. These are compared with experimental results and the simulation closely matched the experimental data. The results of the simulation and measurements will be used for further developing an UWB location and tracking system for outdoor environments.