Semi-hard Magnetic Nanocomposites Based on Out-of-equilibrium Fe2+δNb and Fe2+δTa Laves Phases

Melt-spun Fe100-xNbx and Fe100-xTax alloys consisting of a hexagonal (C14) Laves phase and an iron-based bcc phase were found to exhibit room-temperature coercivities up to 0.45 and 0.48 kOe, respectively. The non-equilibrium C14 structures in the melt-spun alloys are characterized by a smaller unit cell volume, a higher Curie temperature and, presumably, a greater concentration of Fe compared to the C14 structures in the alloys annealed at 1533 K. The room-temperature coercivity, which correlates with the C14 lattice contraction, is believed to be caused by the magnetocrystalline anisotropy of the non-equilibrium Laves phase with the latter being magnetically coupled with the Fe phase via an intergranular exchange interaction. On the other hand, a coercivity of around 0.3 kOe persists in the melt-spun alloys above the Curie temperature of the C14 phase. This high-temperature coercivity may originate from the shape or strain anisotropy of the Fe phase particles. The energy density of the reported two-phase alloys is not sufficiently high to consider them potential hard magnetic materials. However, the pure non-equilibrium Fe2+δNb and Fe2+δTa compounds may be of interest if they can be isolated and textured.