A New Baseline Measurement Method for Multi-Node and Multi-Baseline Interferometric SAR Systems Using Fiber Bragg Gratings

The multinode multibaseline interferometric synthetic aperture radar measurement system is the future development trend in the field of aviation remote sensing. The deformation error between the nodes directly affects the position and orientation error compensation of the load at the node, and the baseline length error directly affects the interferometric phase error compensation. Aiming at the particularity of the wing structure, a structural deformation measurement and baseline measurement method based on the strain mode is proposed. The fiber Bragg grating sensor is used to acquire the strain of each measuring point on the wing in real time, and the deformation of the wing is accurately measured by the modal superposition method, thereby realizing the high-precision measurement of the baseline between the nodes. The measurement result of the dual total station is the benchmark, and the validation of the method was carried out on the existing test system in the laboratory. Under static conditions, the experimental test results show that the wing deformation measurement accuracy is better than 1 mm, and the baseline measurement accuracy is better than 0.5 mm.