Controlling Surface Oxygen Concentration of a Nanocarbon Film Electrode for Improvement of Target Analytes

A nanocarbon film consisting of nanocrystallites with mixed sp 2 and sp 3 bonds formed by unbalanced magnetron sputtering, was studied with respect to changes in the characteristics caused by the surface oxygen concentration. An electrochemical pretreatment (ECP) was conducted to change the surface oxygen concentration of the nanocarbon film. X-ray photoelectron spectroscopy (XPS) measurements revealed that nanocarbon films with different amounts of surface oxygen could be prepared. In addition, we observed no significant increase of surface roughness ( R a ) at the angstrom level after ECP, owing to a stable structure containing 40% of sp 3 bonds. The electrode characteristics, including the potential window, and electrochemical properties for some redox species, such as Ru(NH 3 ) 6 3+/2+ , Fe(CN) 6 3−/4− and some biomolecules, were investigated. The anodic potential limit became wider and Δ E p of Fe(CN) 6 3−/4− became smaller at the treated nanocarbon film electrode than those of the as-deposited nanocarbon film electrode. Based on these results, we realized to measure uridylic acid (UMP) and inosine triphosphate (ITP) with a high oxidation potential by direct oxidation, which was difficult to measure at the as-deposited nanocarbon film electrode.