From Nanocellulose to Wood Particles: A Review of Particle Size vs. the Properties of Plastic Composites Reinforced with Cellulose-based Entities

This review article considers published evidence regarding effects of particle size on mechanical properties of plastic matrix materials filled with cellulose-based reinforcements. Cellulosic or wood-based reinforcements in plastic matrices can contribute to higher modulus, lower density, and less tendency to sag in comparison with the matrix phase by itself, while still allowing the resulting material to be cut or milled. Although cellulosic materials are generally too hydrophilic to adhere well to common thermoplastic materials such as polyethylene, such deficiencies can be overcome by use of compatibilizers, e.g. polyethylene-maleic anhydride. Recently many researchers have evaluated nanocellulose in plastic composites. The higher surface areas of nanocellulose generally imply a higher cost of compatibilizer to achieve good interfacial adhesion. This review first examines results of a large number of studies all involving high-density polyethylene as the matrix. Then, to get a more detailed mechanistic view, studies are considered that compare different particle sizes of cellulose-based reinforcements within the same conditions of preparation of composites prepared with various matrix polymers. To summarize the findings, there does not appear to be any consistent and dependable advantage of using nano-sized cellulosic reinforcements when trying to achieve higher values of composite strength or modulus.