Emission Measurement Of Buses Fueled With Biodiesel Blends During On-Road Testing

Increasing the biodiesel content of diesel fuels is encouraged because of its reduced carbon footprint. Pure rapeseed methyl ester (RME)and used cooking oil methyl ester (UCOME) are characterised by well-to-tank greenhouse gas (GHG) reductions of 54% and 88% compared to pure B0 petrodiesel, respectively. Captive fleets such as public transport buses could benefit from these GHG reductions by increasing the biodiesel content of their fuel because they have a consequent yearly fuel consumption. The aim of this paper is to compare on-road tailpipe emissions of a diesel bus when increasing the biodiesel concentration in the fuel. The tests were carried out on a standard city bus belonging to the Euro V EEV emission standard that was equipped with a portable emission measurement system measuring NO, NO2, PN, CO and CO2 at the tailpipe. The bus followed the SORT which is representative of urban bus driving. The heavy urban on-road measurements indicated increased NOx emissions (24-26%), decreased PN emissions (43-45%) and slightly decreasing CO emissions for B30 RME and UCOME compared to B7. A measurement uncertainty analysis showed that the CO emissions were less reliable. Similar conclusions were drawn for the easy urban on-road bus emission measurements with smaller differences between B7 and B30 RME and UCOME.