Bleaching of Bagasse-Pulp Using Short TCF and ECF Sequence

More than 70 % bleached chemical pulp is produced in India through elemental chlorine-free bleaching in which chlorine-based compounds like chlorine dioxide is a dominant chemical which generates chlorinated organic toxins harmful to the environment. Present studies demonstrate short sequence of bleaching combined with acid treatment, followed by pressurized oxygen delignification. It was found that efficiency of oxygen improved by adding hydrogen peroxide as an additive in oxygen delignification with subsequent treatment with ozone or chlorine dioxide as bleaching agents. It was observed that by using additive in ODL process, pulp can achieve 70 +/- 1 (%ISO) brightness. Reduction attains in kappa number 65-70 % as compared to 45-50 % in control oxygen delignification stage. Through AOpZ and AOpD bleaching sequences, full brightness achieved 84-85 (%ISO) without considerable loss in mechanical strength properties compared to DEpD sequence. A potential reduction in COD, color, and AOX was 28, 53.3, and 88 % respectively were observed in AOpZ short bleaching sequence compared to DEpD bleaching.