Iterative hybrid manufacture of a titanium alloy component

This paper describes an iterative hybrid (additive + subtractive) manufacturing approach for a titanium alloy (Ti6Al4V) part using a laser hotwire directed energy deposition system (LHWDED) and a traditional four-axis milling machine tool. The term iterative hybrid manufacturing is used to described hybrid manufacturing where the additive and subtractive operations occur in multiple stages rather than sequentially. It is currently common to produce an entire part by sequential hybrid manufacturing by additively manufacturing (AM) an entire preform geometry that then requires post processing by another machine tool to create final part features. By contrast, a part produced by iterative hybrid manufacturing (IHM) does not produce the entire preform geometry in a single AM process. Instead, a portion of the entire preform geometry is manufactured by an AM process, then that portion is transferred to another machine tool which creates features in that portion, and then that machined portion is transferred back to the AM machine to complete another AM process. There is no limit to the number of iterations that an IHM process can have. IHM offers several advantages over sequential hybrid manufacturing such as the use of shorter and stiffer subtractive tooling, better access to part geometries that require subtractive processes, and the separation of the AM heat source from the subtractive machine tool. A titanium alloy demonstration part was successfully manufactured by IHM with three iterations using a shared pallet system between the AM machine tool and the subtractive machine tool.11Notice: This manuscript has been authored by UT-Battelle, LLC, under contract DE-AC05-00OR22725 with the US Department of Energy (DOE). The US government retains and the publisher, by accepting the article for publication, acknowledges that the US government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for US government purposes. DOE will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan).