Comparative Study on the Effects of Fe and Ni Additions on the Electromigration Properties of Sn 5 8Bi Solder Joints

international conference on electronic packaging technology(2021)

引用 0|浏览0
暂无评分
摘要
Sn 5 8Bi eutectic solder is the preferred material for low temperature solder in multistage packaging. However, the brittleness and reliability problems of Sn 5 8Bi eutectic solder, especially the phase separation of electromigration, bring great challenges to its application for multi-stage package interconnection. The modification of Sn 5 8Bi eutectic solder by alloying has many significant technical advantages, such as effective control of interfacial wetting, intermetallic compounds phase transformation, growth kinetics, and improvement of resistance to electromigration. In this paper, Sn 5 8Bi, Sn 5 8Bi-lFe/lNi solder were prepared by melting method and fabricated to the solder joint for electromigration test. The electromigration test of solder joint were carried out with 0.5×104A/cm2 current density at 50°C, and the influence of Fe, Ni alloy elements addition on interfacial IMC growth and microstructure evolution of solder joint interface were studied. The results show that Fe and Ni alloy elements react with Sn to form FeSn2 and Ni 3 Sn 4 IMC, respectively. FeSn2 are triangle or square, and distributed near the interface and embedded in bismuth rich phase and tin rich phase after electromigration test. Compared these two kinds solder joints, it can be seen that the Fe alloy elements can promote the growth of interface IMC and the aggregation of bismuth rich phase, while the Ni alloy elements can greatly inhibit the growth of interface IMC and the aggregation of bismuth rich phase. It may be due to the existence of FeSn2 near the interface, which changes the growth behavior of bismuth rich phase and bin rich phase near the interface of Sn 5 8Bi-1Fe/Cu solder joints and promotes their growth. As for the inhibition of Ni alloy elements on the growth of interfacial IMC and bismuth rich phase in the anode under the condition of EM, the reason is that Ni 3 Sn 4 forms a barrier in the solder matrix, which hinders the diffusion of atoms.
更多
查看译文
关键词
electromigration properties,ni additions
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要