Coke-assisted microwave ignition and combustion behaviors of anthracite in a switching atmosphere

Low volatile coal has a large reserve but faces significant challenges in industrial applications. Due to the rapid and selective heating process, microwave-based technology is generally applied in various studies of carbona-ceous materials. This work verified a novel non-contact microwave ignition of anthracite mixed with coke, where typical events of ignition or combustion were recorded by a digital camera. Video image analysis showed that the weakening of O-2 to the tiny spark discharges between coke particles failed microwave heating. Hence a switching atmosphere (100% N-2 firstly, then O-2 at a certain proportion added) was used to ensure rapid microwave heating and subsequent ignition. Ignition of mixed anthracite & coke took place in the middle of the sample once the volatile flame appeared, which following the sample locally turned red-hot. The time for the flame burning was prolonged by the microwave power and especially the increase of O-2 proportion. Gas products analysis showed a large amount of CO and CO2 instead of CH4 and H2O during the flame burning, which suggested that extra gasification reaction, where CO as product, supported the existence of flame. Moreover, the plasma generated by the violent discharge further expanded the range of the flame, with clear spectral peaks at 589 nm, 766 nm, and 770 nm. In addition, the distribution of coke in the mixture for effective ignition was also discussed. This study may provide a new idea for the application of low volatile coals.