Effects of residential building height, density, and floor area ratios on indoor thermal environment in Singapore.

Building height, building density, and floor area ratio are the three key parameters in urban planning. However, little is known about their impact on indoor thermal environments as compared with outdoor thermal environments. The study aimed to investigate their impact on indoor air temperatures in Singapore. Singapore's residential buildings were reviewed from the perspective of the three parameters, and the Envi-met model was employed for simulation after its accuracy was confirmed by field experiments. Indoor air temperatures under 18 scenarios were simulated and analyzed. The analytical results revealed that among the three parameters, the building density was the most influential. An increase in building density reduced the indoor temperature. In Singapore, the building density increases from 0.0625 to 0.766, which reduced the mean indoor temperature by 4.7 °C. The indoor temperature decreased slightly with an increase in building height. An increase in building height from 12 to 72 m produced an indoor temperature decrease of approximately 1.7 °C. The influence of floor area ratio on indoor air temperature was the most complex. For a fixed floor area ratio of 2, the indoor temperature first increased and then decreased with an increase in building density, which resulted in an indoor temperature difference of 2.1 °C when the building density increased from 0.141 to 0.766.