AlGaN-Based Deep Ultraviolet Light-Emitting Diodes with Thermally Oxidized AlxGa2-xO3 Sidewalls

AlGaN and GaN sidewalls were turned into AlxGa2-xO3 and Ga2O3, respectively, by thermal oxidation to improve the optoelectrical characteristics of deep ultraviolet (DUV) light-emitting diodes (LEDs). The thermally oxidized Ga2O3 is a single crystal with nanosized voids homogenously distributed inside the layer. Two oxidized AlxGa2-xO3 layers were observed on the sidewall of the AlGaN layer in transmission electron microscopy images. The first oxidized AlxGa2-xO3 layer is a single crystal, while the second oxidized AlxGa2-xO3 layer is a single crystal with numerous nanosized voids inside. The composition of Al in the first oxidized AlxGa2-xO3 layer is higher than that in the second one. The thermal oxidation at high temperature degrades the quality of the p-GaN layer and increases the forward voltage from 8.18 to 11.36 V. The thermally oxidized AlxGa2-xO3 sidewall greatly enhances the light extraction efficiency of the lateral light of the DUV LEDs by combined mechanisms of holey structure, graded refractive index., high transparency, and tensile stress. Consequently, the light output power of the DUV LEDs increases from 0.69 to 0.88 mW by introducing a 420 nm thick AlxGa2-xO3 sidewall oxidized at 900 degrees C, in which the enhancement of light output power can reach 27.5%.