Silica-Fiber-Reinforced Composites for Microelectronic Applications: Effects of Curing Routes.

Materials (Basel, Switzerland)(2023)

引用 2|浏览7
暂无评分
摘要
For curing of fiber-reinforced epoxy composites, an alternative to thermal heating is the use of microwave energy, which cures quickly and consumes less energy. Employing thermal curing (TC) and microwave (MC) curing methods, we present a comparative study on the functional characteristics of fiber-reinforced composite for microelectronics. The composite prepregs, prepared from commercial silica fiber fabric/epoxy resin, were separately cured via thermal and microwave energy under curing conditions (temperature/time). The dielectric, structural, morphological, thermal, and mechanical properties of composite materials were investigated. Microwave cured composite showed a 1% lower dielectric constant, 21.5% lower dielectric loss factor, and 2.6% lower weight loss, than thermally cured one. Furthermore, the dynamic mechanical analysis (DMA) revealed a 20% increase in the storage and loss modulus along with a 15.5% increase in the glass transition temperature (Tg) of microwave-cured compared to thermally cured composite. The fourier transformation infrared spectroscopy (FTIR) showed similar spectra of both the composites; however, the microwave-cured composite exhibited higher tensile (15.4%), and compression strength (4.3%) than the thermally cured composite. These results illustrate that microwave-cured silica-fiber-reinforced composite exhibit superior electrical performance, thermal stability, and mechanical properties compared to thermally cured silica fiber/epoxy composite in a shorter time and the expense of less energy.
更多
查看译文
关键词
dielectric properties,microwave curing,reinforced composites,thermal properties
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要