Fabrication of sports mouthguards using a semi-digital workflow with 4D-printing technology

Purpose: This technical procedure report explains the fabrication protocol for a newly developed 4D-printed sports mouthguard (MG) based on 4D-printing technology.Methods: An intraoral scanner was used to scan a maxillary arch model. A two-layer sports MG was designed based on the scanned model using computer-aided design software and output in a standard tessellation language file format. Two types of filament materials were used for the MG material: a thermoplastic shape memory polyurethane elastomer with a unique glass transition temperature for the external layer and a thermoplastic elastomer for the internal layer. Both MGs were printed using a fused deposition modeling 3D printer and assembled using adhesives after trimming the support material. To confirm the shape-memory performance of the fabricated 4D-printed MG, a deviation analysis was performed by superimposing the internal surface data of the fabricated MG and the MG whose shape was recovered. The distance be-tween the data obtained by deviation analysis was calculated, and the root mean square error value (mm) was determined.Conclusions: The 4D-printing technology simplifies the complex processes required with conventional methods. It also overcomes the issues of conventional and 3D-printed MGs, such as the reduced fitting accuracy caused by deformation, because this technology employs shape memory materials.