Characterization and Disinfection by Product Formation of Dissolved Organic Matter in Anaerobic-Anoxic-Oxic Membrane Bioreactor (AAO-MBR) Process

In the process of sewage treatment, the characteristics of dissolved organic matter (DOM) are always changed during chemical and biological processes, affecting the generation of disinfection by-products (DBPs) compositions at the following disinfection stage. The present study systematically investigated the effect of DOM characterization on C- and N-DBPs formation at AAO-MBR reactor when treating wastewater. The results showed that the AAO-MBR treatment process could efficiently eliminate dissolved organic carbon (DOC) and ammonium nitrogen (NH4+-N) from wastewater with an elimination rate of 89% and 98%, respectively. Most of the precursors (i.e., 56.8% C-DBPs and 78.1% N-DBPs) were removed at the MBR unit, while AGC and AAO units promoted the formation of DBPs precursors. More specifically, soluble microbial products (SMPs) and humus acid were increased, which led to improved C- and N-DBPs via aerated grit chamber (AGC) treatment. At the AAO treatment unit, the content of low MW hydrophobic SMPs, humus acid, and polysaccharides was increased, indicating low MW and HPO fractions dominating the C- and N-DBPs. MBR treatment improved C-DBPs in high MW and HPO fractions and N-DBPs in low MW and HPO fractions, which is explained by higher MW hydrophobic SMPs and humus acids, compared to the AAO unit. The present study provided deep insight into the linkage of DOM characteristics and C- and N-DBPs formation at each treatment unit during the AAO-MBR process.