CeO2/CuO/NiO hybrid nanostructures loaded on N-doped reduced graphene oxide nanosheets as an efficient electrocatalyst for water oxidation and non-enzymatic glucose detection

In this work, the three-component heterostructure of CeO2/CuO/NiO was synthesized by a co-precipitation procedure and heating at a temperature of 750 degrees C. Then, CeO2/CuO/NiO nanoparticles were successfully supported on N-doped reduced graphene oxide (N-rGO) by a hydrothermal method. The obtained nanomaterials were used as effective electrocatalysts for the oxygen evolution reaction and glucose sensing in an alkaline medium. The results indicated that when CeO2/CuO/NiO is anchored on N-rGO nanosheets, active catalytic sites increase. On the other hand, N-doped rGO enhances electrical conductivity and electron transfer for water or glucose oxidation. CeO2/CuO/NiO@N-rGO has a large electrochemically active surface area and more active catalytic positions, and thus exhibits high activity for the OER with a low overpotential of 290 mV, a suitable Tafel slope of 110 mV dec(-1), and superior stability and durability for at least 10 hours. CeO2/CuO/NiO@N-rGO can also detect glucose with a high sensitivity of 912.7 mu A mM(-1) cm(-2), a low detection limit of 0.053 mu M, a wide linear range between 0.001 and 24 mM, and a short response time of about 2.9 s. Moreover, the high selectivity and stability of this electrode for glucose sensing show its potential for clinical applications.