Cyclic Behavior of Steel Headed Stud Anchors in Concrete-filled Steel Deck Diaphragms through Push-out Tests

Earthquake disasters in the United States account for $6.1 billion of economic losses each year, much of which is directly linked to infrastructure damage. These natural disasters are unpredictable and represent one of the most difficult design problems in regard to constructing resilient infrastructure. Structural floor and roof diaphragms act as the horizontal portion of the lateral force resisting system (LFRS), distributing the seismically derived inertial loads out from the heavy concrete slabs to the vertical LFRS. Composite concrete-filled steel deck floor and roof diaphragms are ubiquitously used in commercial construction worldwide due to the ease of construction and cost-effective use of structural material. This report presents a series of composite steel deck diaphragm Push-out tests at full scale that explore the effect that cyclic loading has on the strength of steel headed stud anchors. The effect that cyclic loading has on structural performance is explored across the variation of material and geometric parameters in the Push-out specimens, such as concrete density, steel headed stud anchor placement and grouping, steel deck orientation, and edge conditions. As compared to prior tests in the literature, the push-out tests conducted in this work have an extended specimen length that includes four rows of studs along the length rather than the typical two rows of studs, and an ability to impose cyclic loading. This provides novel insight into force flows in the specimens, failure mechanisms, and load distribution between studs and stud groups.