Switchable and tunable multi-wavelength random distributed feedback fiber laser based on parallel Lyot filter

A switchable and tunable multi-wavelength random distributed feedback fiber laser based on a parallel Lyot filter is designed, and the transmission characteristics of the filter are deduced in detail by using the transmission matrix theory. The randomly distributed backward Rayleigh scattering generated in single-mode fiber (SMF) serves as a feedback mechanism. The number of output wavelength increases linearly with the increase of pump power. By adjusting the polarization controller (PC) to control the polarization state of the beam into the polarization maintaining fiber (PMF), laser channels with wavelength interval of 0.88 nm or 0.46 nm can be output. Where the wavelength interval depends on the wavelength phase difference caused by the corresponding branch PMF. The intensity-dependent loss (IDL) caused by the nonlinear optical loop mirror (NOLM) in the experimental structure is not only used to suppress the intense mode competition caused by EDF, but also to control the spectral range of the output wavelength to achieve tunable laser output. When the wavelength interval is 0.88 nm, the wavelength tuning ranges of the three and four laser channels are 4.4 nm and 3.7 nm, respectively. When the wavelength interval is 0.46 nm, the wavelength tuning ranges of the three and four laser channels are 3.7 nm and 4 nm, respectively. Subsequently, the influence of using different lengths of SMF on the output wavelength is analyzed. It is found that longer SMF can increase the linewidth of the laser channel, and the side mode suppression ratio (SMSR) will be improved to 39 dB. In addition, the output power fluctuation of the laser is less than 0.32 dB within 30 min, and the power amplitude and SMSR are stable at -4.47dBm and 34.5 dB, respectively, indicating that the laser can achieve flat and stable multi-wavelength output at room temperature.