Performance of a BAPVT modules coupled TEHR unit fresh air system based on micro heat pipe array

Energy consumption for heating and cooling fresh air has become a major component of building energy consumption, and there is a growing focus on highly-efficient and energy-conserving fresh-air treatment technology. This paper presents a new fresh-air system based on a high-efficiency heat transfer element, the micro heat pipe array (MHPA). It consists of a novel air-cooled building attached to a photovoltaic/thermal module (MHPABAPVT) and a thermoelectric heat recovery unit (MHPA-TEHR). The system uses solar energy, photovoltaic power generation, and waste heat for fresh air preheating. A series of fresh-air systems were designed, constructed, tested, and analyzed. The results reveal that on sunny winter days, the temperature of fresh air flowing through MHPA-BAPVT modules can increase by 22.15 degrees C. The average thermal and electric efficiency of the MHPA-BAPVT modules was 12.16% and 7.10%, respectively, and MHPA-TEHR could exceed the upper limit of passive heat recovery technology, which could generate 1.25 kW of heat per 1 kW of input electric power. The maximum ratio of total heating power to the total power consumption of the fresh-air system reached 14.94. During a typical day in the winter season, solar preheating exceeded the fresh air heat requirement by 24.34%, and the excess heat provided 292.92 MJ for building heating demand. Comparing the electric heating fresh-air unit with conventional heat recovery, the former achieved nearly zero energy consumption during the winter season. During the transitional season, the system could provide 711.82 MJ of solar energy, which improved the indoor temperature. Finally, using the experimental data and meteorological parameters of Zibo, the annual heat and electricity benefits and reduced carbon dioxide emissions of the fresh-air system were calculated. The freshair system in this study can fully utilize solar energy for heat collection and power generation to reduce building energy consumption and can be applied widely.