Deformation Monitoring and Dynamic Analysis of Long-Runout Bedding Landslide Based on InSAR and Particle Flow Code

Long-runout landslides occur frequently in the sandstone and mudstone mountainous areas in southwestern China under heavy rainfall conditions. This has been a key issue in the field of disaster prevention and reduction. Considering the Niuerwan landslide in Wulong, Chongqing, on 13 July 2020, as an example, we employed technical methodologies, including unmanned aerial vehicle (UAV) images, field investigation, geological condition analysis (including geomorphology and topography, stratigraphic structure and formation lithology, etc.), interferometric synthetic aperture radar (InSAR) monitoring and Particle Flow Code 3D (PFC3D) simulations to study failure mechanism and a long-runout motion model of flow-like landslides induced by the heavy rainfall. The results showed that (1) the large differences between the upper and lower strata are the root cause of the instability and long-runout fluidization movement; (2) heavy rainfall is the key driving factor of slope instability and deep-seated landslides, leading to long-distance movement of the upper saturated residual soil; (3) the long-runout fluidization model of bedding landslides is mainly divided into the overall sliding in the lower layer, the mixing of coarse and fine particles in the middle layer, and saturation fluidization in the upper layer; and (4) the long-runout fluidization process of bedding landslides is composed of three stages: overall instability, mixed acceleration, and fluidization accumulation. In view of these findings, in the risk evaluation and prediction of long-runout fluidization landslides in sandstone and mudstone mountainous areas, this particular disaster model can be used to provide quantitative references for disaster prevention and mitigation.