Measurements, correlations and thermodynamic modeling of aqueous two-phase systems of polyvinylpyrrolidone (PVP) plus sulfate/citrate salts

Aqueous two-phase systems (ATPS) can be described as an alternative to traditional liquid-liquid extraction systems, typically consisting of a polymer and a salt solution. An alternative polymer called polyvinylpyrrolidone (PVP) has emerged as a viable option for ATPS due to its low cost, stability, and potential. This study aimed to investigate the effect of the molecular weight of poly (vinylpyrrolidone) (PVP) (K17, K25, and K30) and the temperature (298.15, 303.15, and 308.15 K) in the system ATPSs composed of PVPs and sodium sulfate/potassium sulfate/tri sodium citrate. The tie-line data were determined by measuring the density (rho) and refractive index (n(D)). Moreover, the phase compositions and plait point are investigated for different PVPs molecular weight, temperature, and salt type. In addition, the effect of these parameters on the binodal curve, tie-line length (TLL), and slope of tie line (STL) are analyzed in detail by comparing them with the literature data. The impact of the parameters on the binodal curves was investigated by utilizing the values of the effective excluded volume parameter (EEV) that were calculated from the LLE data. Furthermore, the binodal curves and the tie-line compositions were well-fitted by using some semi-empirical equations. The phase separation ability is enhanced with temperature and PVPs molecular weight. The modified UNIFAC-NRF is used to correlate the liquid-liquid equilibrium data of the studied systems and the optimized binary group interaction parameters were determined.