Multiple control strategies for smart photovoltaic inverter under network voltage fluctuations and islanded operation

This article proposes a central control system that communicates with both grid-tied and off-grid control systems to offer various control strategies for operating a smart photovoltaic (PV) inverter. The target is to connect two sets of PV panels and one set of battery storage unit to either a 440 V/60 Hz utility grid or to feed local loads at 380 V/50 Hz using a smart inverter. When the smart PV inverter is connected to the grid, on the one hand, it injects fixed and programmed active power into the grid under all operating conditions, both normal and critical conditions, and on the other hand, by reciprocal exchanging reactive power with the grid, it addresses balanced and unbalanced fluctuations of the grid voltage. Also, when the smart PV inverter is disconnected from the grid, it can operate as an islanded mode to feed time-varying three-phase loads. Nonlinear simulations of the time domain in MATLAB-Simulink software show that the set of control strategies offered for the smart PV inverter not only by controlling the active power leads to the sale of electricity to the grid, but also by controlling the reactive power problems on the grid side such as voltage drop as a result of single-line-to-ground (SLG) or line-to-line-to ground (2LG) faults, balanced grid voltage fluctuations such as voltage sag-swell and unbalanced voltage conditions will be resolved. Also, variable three-phase loads are fed well in off-grid mode.