In-situ Emulsification in Low-Tension Surfactant/polymer Systems: Impacts on Enhanced Oil Recovery

The flow of two immiscible liquids in porous media can lead to fluid mixing, resulting in emulsions-where one phase is dispersed as droplets in the other. In reservoir rocks, natural surfactants and polar molecules, like asphaltenes, can promote oil-water emulsion formation. During chemically enhanced oil recovery processes (CEOR) such as surfactant, alkali, or surfactant-alkali flooding, in-situ emulsification is often seen as key to enhancing frontal stability and facilitating the piston-like displacement of oil by water. However, this work reports a minimal effect of in-situ emulsification on oil production during surfactant-polymer (SP) flooding. Experimental studies show this by injecting prepared emulsions into a multi pressure-tap core holder and examining emulsion formation in one reservoir core before moving it into a second core for oil displacement. This helps us understand the specific role of emulsions in oil mobilization. Factors like surfactant concentration, interfacial tension, and the timing of introducing the surfactant-polymer solution do influence the intensity of insitu emulsification. Yet, the incremental oil recoveries show no significant differences. Through similar experiments, it is observed that ultra-low interfacial tension (IFT) in our surfactant-polymer system is the primary mechanism for oil mobilization. The slight increase in pressures suggests that in-situ emulsification has a limited role in increasing flow resistance during the ultra-low IFT SP flood process, potentially not improving the swept volume. This research can guide the development of systematic approaches to analyze the effects of in-situ emulsification on oil mobilization and evaluate chemical flooding processes.