Tailoring the microstructure, mechanical and tribological properties and oxidation resistance of (AlTiCrVTa)Nx coatings by controlling nitrogen content

A set of novel (AlTiCrVTa)Nx coatings are synthesized by DC magnetron sputtering to methodically investigate the effect of nitrogen content on the microstructure, mechanical and tribological properties and oxidation behavior of the coatings for the first time. As the nitrogen content increases, the coating structure transitions from amorphous to a simple fcc structure, accompanied by a change of preferred orientation from (200) to (111) and an enhancement in crystallinity. The coating morphology changes from featureless glassy to columnar crystals. The highest nanohardness of 38.1 GPa and the best wear rate of 4.9 × 10−7 mm3/Nm are achieved at 43.3 at.% nitrogen content. The friction coefficient exhibits a downward trend with rising nitrogen content, reaching the lowest value of 0.47 at 49.8 at.% nitrogen content. The oxidation tests reveal that the oxidation resistance deteriorates with increasing nitrogen content, caused by the looser structure and large-sized grain boundaries.