Two-Level Self-Thickening Mechanism of a Novel Acid Thickener with a Hydrophobic-Associated Structure during High-Temperature Acidification Processes

Two acid thickeners, ADMC and ADOM, were prepared by aqueous solution polymerization using acrylamide (AM) and methacryloyloxyethyl trimethyl ammonium chloride (DMC) as raw materials, with or without the introduction of octadecyl polyoxyethylene ether methacrylate (OEMA). It was characterized by FTIR, 1H NMR, and the fluorescence spectra of pyrene. The double-layer thickening mechanism of ADOM was proved by comparing the thickening and rheological properties of ADMC and ADOM tested by a six-speed rotary viscometer and a HAKKE MARSIV rheometer during the acidification process. The results showed that the synthetic product was the target product; the first stage of the self-thickening ADOM fresh acid solution during high-temperature acidification was mainly affected by Ca2+ concentration, and the second stage of self-thickening was mainly affected by temperature. The residual viscosity of the 0.8 wt% ADOM residual acid solution was 250, 201.5, and 61.3 mPa center dot s, respectively, after shearing at 90, 120, and 150 degrees C for 60 min at a shear rate of 170 s-1. The thickening acid ADOM with a hydrophobic association structure has good temperature resistance and shear resistance, which can be used for high-temperature deep-well acid fracturing. In addition, no metal crosslinking agent was introduced in the system to avoid damage to its formation, and ADOM exhibited good resistance to Ca2+, which could provide ideas for the reinjection of the acidizing flowback fluid. It also has certain advantages for environmental protection.