Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing

The binary Fe–Ni system offers alloys with notably low linear coefficients of thermal expansion (CTE), contingent upon their Ni content. In this respect twin-wire arc additive manufacturing (T-WAAM) presents the opportunity of in-situ alloying through the simultaneous feeding of two metal wires into a weld pool to obtain desired alloy compositions. This study aims to deposit a graded wall with Ni contents targeted at 42, 46, and 52 wt% in the building direction of the wall, along with a block comprising of 46 wt% Ni, employing the T-WAAM approach. The results show effective incorporation of additional Ni into the weld pool and geometrically stable weld beads in the continuous metal transfer mode during the T-WAAM process. This mode led to the defect-free and chemically stable deposition of the graded wall and the block with average Ni contents of 42.3 ± 1.1, 45.8 ± 1.4, 52.6 ± 0.8 wt%, and 46.4 ± 0.9 wt%, respectively. The Curie temperature measurements of the as-deposited alloys and the mean CTE values of alloy 46 were found to be comparable to the commercial alloys. In summary, this study validates the feasibility of in-situ deposition of low thermal expansion alloy compositions, thereby enabling the possibility of on-demand thermal expansion properties.