PC-SAFT-Assisted Design of Antisolvent Naproxen Crystallization in the Presence of Polymers

The solubility of naproxen in aqueous solutions containing polyvinylpyrrolidone (PVP) or poly(vinylpyrrolidone-co-vinylacetate) (PVPVA64), was predicted using the thermodynamic model PC-SAFT. The predictions showed a lower solubility of naproxen in PVP solutions compared to PVPVA64 solutions, and the results were confirmed experimentally. Based on this data and their modeling, suitable process conditions for a solvent/antisolvent crystallization of naproxen in the presence of one of the two polymers were identified to produce long-acting injectable suspensions. Naproxen crystallization experiments were conducted by means of antisolvent precipitation from a supersaturated ethanol solution using water as antisolvent. PC-SAFT predictions were used to identify the initial naproxen concentration in solvent solutions, the optimum antisolvent-to-solvent stream ratio, the final naproxen loading, and the theoretical crystal yield, thus assisting the design of the crystallization experiments. The maximum absolute deviation between the experimental crystal yield and that obtained from PC-SAFT predictions was about 1.4%. The size of naproxen particles obtained from the crystallization experiments was less than 20 mu m, which is in accordance with the particle size required for long-acting injectable suspensions.