Promoted catalytic property of Cu/SSZ-13 by introducing a minority of Mn for NO removal from diesel engine exhaust

The Cu-exchanged SSZ-13 with the small-pore chabazite framework is considered as a highly efficient catalyst for selective catalytic reduction of NO with NH3 (NH3-SCR). In order to further improve the catalytic property, a series of Mn ion-assisted Cu/SSZ-13 powder catalysts were prepared by co-exchange method and stepwise exchange method. It is found that the NH3-SCR activity, N2 selectivity, hydrothermal stability and sulfur resistance of Cu/SSZ-13 are promoted by introducing a minority of Mn (0.15%–0.23%(mass)) through co-exchange method. Characterization results revel that the Cu,Mn co-exchange enables the higher amounts of Cu2+ active sites, the abundant medium strong and strong acid, the optimized ratio of lewis acid to Brønsted acid, etc., which are required for a good NH3-SCR catalytic property over broad temperature range and under harsh working environment. Moreover, a monolithic catalyst was prepared by impregnating a cordierite ceramic support into the coating slurry containing the optimized CuMn/SSZ-13 powder. The diesel engine bench tests show that Cu,Mn co-exchange gives the monolith catalyst a better catalytic property than commercial catalysts. This work provides an important guidance for the rational design of secondary-ion-assisted zeolites applied in NH3-SCR.