Control of elongated plasmas in superconductive tokamaks in the absence of in-vessel coils

Abstract The roadmap for the commissioning and first operations of superconductive tokamaks envisages the possibility of running discharges with fairly elongated plasmas before the complete installation of the in-vessel components, including vertical stabilization coils, or any other specific sets of coils to be used for the magnetic control of fast transients. In the absence of dedicated actuators, the magnetic control system shall perform the essential fast control actions by using the out-vessel superconductive coils, if needed. These are typically less efficient in reacting to fast transients, due to the shielding effect of the vessel and imply a coupling with other control tasks relying on the same actuators, such as plasma current, position, and shape control. Hence, effective actuator-sharing strategies must be put in place. This paper presents an architecture and a possible control strategy that is able to cope with vertically unstable elongated plasmas subject to fast varying disturbances, in the absence of dedicated in-vessel coils. The architecture exploits a model-based actuator-sharing approach to effectively accomplish the main magnetic control objectives while minimizing the crosscouplings among the various tasks. The effectiveness of the approach is demonstrated by means of nonlinear simulations of realistic JT-60SA scenarios. In particular, an isoflux plasma shape controller is integrated with plasma current control and vertical stabilization. The proposed control approach proves to control vertical displacement events and plasma deformations due to fast variations of poloidal beta with satisfactory performance.