Chitosan and sodium alginate have been widely studied as sustainable agents for soil stabilisation. However, most existing studies focus on dry or compacted conditions, while the mechanical behaviour under fully saturated conditions remains poorly understood. In practice, soils in infrastructures such as embankments and road foundations may remain saturated for extended periods due to prolonged rainfall or flooding. Moreover, the effects of biopolymer treatments are mostly based on unconfined compression and direct shear tests, which do not allow control of saturation conditions or stress paths. This study, therefore, examines the performance of chitosan- and alginate-treated sands under fully saturated conditions. Cone penetration tests showed that chitosan-treated coarse and fine sands effectively retained their structural integrity for several months. In contrast, for alginate, merely using SA was insufficient; crosslinking with calcium chloride (CaCl2) was required to achieve greater mechanical stability. Consolidated drained triaxial tests further confirmed that both chitosan and Ca-crosslinked alginate significantly improved the shear strength of the sands, enhancing both cohesion and friction angle. Physicochemical and microstructural characteristics further explained the improved mechanical performance. These findings clarify the performance and applicability of biopolymer-treated soils under fully saturated conditions, demonstrating their potential for geotechnical applications where long-term saturation is unavoidable.
Predicting microplastic (MP) transport in aquatic environments requires understanding how particle properties, hydrodynamics, and aggregation processes control vertical transport, particularly in turbid systems. Here we investigate how particle physical properties and interactions with fine sediments influence the settling velocity of small MPs (<125 μm) under controlled laboratory conditions. We propose a novel methodology using an optical settling column (SCAF) to measure the settling velocity of MPs with contrasting sizes, shapes, and densities, both as dispersed particles and in mixtures with fine cohesive sediments at concentrations typical of turbid environments, under three treatments: dispersed, preagitated, and prerested. Settling velocities of dispersed MPs were primarily governed by size and density with minor shape effects. Empirical models developed for natural particles accurately predicted the MP settling in this size range. In MP-sediment mixtures, the settling behavior varied markedly with particle properties and treatment conditions. Irregular particles, particularly fragments, exhibited flocculation under all treatments and higher settling velocities, whereas larger spheres interacted weakly with sediments and settled independently. Under prerested conditions, most particles showed enhanced and more uniform settling, with floc velocities converging around ∼0.5-0.6 mm/s. These findings offer insights into aggregation-driven vertical transport and provide a basis for improving predictive models in turbid environments.
Robust perception in adverse weather conditions remains a significant challenge for autonomous vehicles. Short-wave infrared (SWIR) sensors offer specific physical properties that enable them to penetrate atmospheric disturbances like fog, rain, and snow. However, effectively combining this robustness with the textural and colour information of visible (VIS) cameras is difficult due to signal decorrelation and the limitations of static fusion schemes. To address this, we present VISWIR (Visible and SWIR Weighted Image Reconstruction), a pixel-level fusion method based on a multi-scale pyramid architecture. We introduce an automated strategy for scheduling parameters based on weather conditions using an optimisation framework. Rather than relying on static weights, our method applies offline parameter scheduling to adjust fusion hyperparameters based on the meteorological context. We focus on a multi-objective optimisation approach that maximises perceptual image quality via No-Reference Image Quality Assessment (NR-IQA) metrics. Validated in controlled environment scenarios with varying weather severities, our results confirm the potential of VISWIR as a robust, lightweight algorithmic baseline to enhance the perception capabilities of autonomous vehicles in adverse weather conditions.
This research started with the objective to document and analyse the changes between spring and summer on the dyke Quenin, an earthen structure subjected to erosion by the sea waves. As test flights, two surveys were done and some conclusions were drawn from the corresponding structure from motion (SfM) pipeline outputs, orthomosaic and digital surface model (DSM). Initially, we conducted a study to assess the achievable accuracy of topographic models with the available equipment, correction networks and flight parameters. Next, we evaluated the impact of various ground control point (GCP) and checkpoint (CP) distributions on the accuracy of the DSM to identify the optimal configuration for future monitoring missions. Finally, we were able to detect changes in topography, vegetation and shallow bathymetry using only RGB images. In terms of topography, we identified areas affected by overtopping and erosion. Vegetation changes were observed using visible band vegetation indices (VVI), although these were influenced by the site lighting conditions during the missions. Shallow bathymetry, covering depths from 0 to -5 m, was derived using well-established methods based on water colour. The main contribution of this article is to demonstrate the potential of red, green and blue (RGB) imagery acquired by unmanned aerial vehicle (UAV) for monitoring changes in topography, bathymetry, armour rocks and vegetation and to define flight parameters for future monitoring missions on the dyke.
The thermal behavior of urban blocks is influenced by multiple factors, including climate, design, geometry, materials, and landscape elements. Optimizing these parameters is essential for sustainable and comfortable urban environments. This study investigates the thermal performance of an urban block with a courtyard (UBC) using a 1:10 scale experimental model built with Oriented Strand Board (OSB). The experiment examines the influence of surface coatings on thermal behavior in a naturally ventilated setting, with a focus on courtyard microclimates. A key objective is to assess how architectural form and material properties affect heat transfer between indoor and outdoor spaces. Results indicate that white cladding reduces the indoor-outdoor temperature difference to 1.78 ℃, demonstrating its potential for thermal comfort. However, a maximum temperature difference of 24.29 ℃ suggests substantial heat exchange, emphasizing the role of coatings in moderating urban microclimates. The results emphasize the critical role of coating materials and architectural form in modulating courtyard microclimates, offering valuable insights for urban designers and policymakers aiming to enhance thermal efficiency in dense urban environments.