Roller-compacted concrete (RCC) in dam construction has become popular in most areas of Tibet. The service environment and incorporation of high fly ash in RCC make it a big challenge of attaining balance between excellent freezing-thaw resistance and high strength. It is reported that the modified absorptive polymer (MAP) presents excellent freezing-thaw resistance in RCC. However, the influential mechanism of MAP in RCC is not clear. In this study, the cementitious materials (RCC, fly ash blended pastes, and mortars) incorporated with MAP are utilized. Working and mechanical performances of RCC are studied. Hydration and microstructure of blended pastes are investigated by many experimental tests (hydration heat test, electrical resistivity test, differential thermogravimetric test, nuclear magnetic resonance test, and nanoindentation test). Rheological and drying shrinkage of mortar are analyzed. It is found that MAP has no significant effect on the Vc value, air content, and apparent density of RCC. The incorporation of 0.3% by weight MAP2 significantly increases the compressive strength of RCC by up to 28.7%, but the effect on the splitting tensile strength is negligible. The incorporation of MAP has little effect on the rate of hydration of blended pastes, amount of chemically bound water and calcium hydroxide (CH). The incorporation of MAP in the blended paste is helpful to increase the average chain length (ACL) of C & horbar; S & horbar; H and content of high-density C & horbar; S & horbar; H (HD C & horbar; S & horbar; H) gel, concurrently impeding the migration of Al. Water absorption and release behaviors of MAP strongly affect the fluidity, yield stress, plastic viscosity and drying shrinkage of the mortar.
Decisions on the lifetime extension of wind turbines require evaluating the remaining useful life of major load-carrying components by making a comparison to the design lifetime. This work focuses on the lifetime assessment of two fundamentally different components: a structural component in the form of the tower and rotating components in the form of the main bearings. A method is presented that combines high-frequency SCADA, accelerometers, tower bottom and blade root strain gauge bridges, and limited design information for continued estimates of the component loads and their subsequent fatigue damage accumulations. The work is applied to a highly instrumented DTU research turbine, a Vestas V52 model, where strain gauges in the blade root and in the tower bottom are calibrated for nearly 10 years using continual calibration methods without the need for operator input. The lifetime estimates of the tower bottom and front and rear main bearings were found to be 2952, 282, and 566 years, respectively, reflecting the low average wind speed of the turbine site compared to the wind turbine design wind class IA. Secondly, it was investigated whether virtual load sensors can replace tower strain gauges. Consistent tower bottom strain signal estimates and long-term damage accumulation were achieved with ±5 % lifetime variability once SCADA, nacelle accelerometers, and blade root strain gauges were combined for the deployment of a long short-term memory (LSTM) neural network. A systematic underprediction of the accumulated damage of the tower bottom was observed for the virtual load sensors with a reduced set of inputs, and a correction method was proposed. Finally, the impact of environmental conditions, including turbulence intensity and shear exponent of the incoming wind, on the main bearing lifetime was investigated based on load measurements. A simple drivetrain thermal model was used to evaluate the modified lifetime L10 m of the main bearings. Fatigue loads in the locating main bearing are driven by the peak of the turbine thrust curve, with higher loads observed at rated wind speed. An effect of longer main bearing lifetime with higher turbulence intensity was observed at rated wind speed and can be explained by the turbulence averaging of the thrust loads.
Accurate forecasting of power generation from photovoltaic (PV) power plant clusters can support the safe and stable operation of the power grid. Individual PV power plants cover relatively small areas, and weather conditions within each plant are often relatively similar. Forecasting methods based on weather-pattern classification can help account for differences in input–output relationships across weather conditions. However, clusters of PV power plants typically span hundreds to thousands of square kilometers, where weather types across individual plants within the region are inconsistent. This inconsistency makes it difficult to directly apply existing classification modeling methods to the entire area. Therefore, this paper proposes a method for day-ahead power forecasting of PV power plant clusters based on sub-region extended weather patterns and dynamic graph attention networks. First, based on the total historical PV generation of the region, a Gaussian mixture clustering algorithm is employed to obtain three types of composite weather patterns and their corresponding benchmark weather scores. Second, considering the spatial distribution of each site, multiple subregions are delineated. Based on forecasted irradiance, the weather pattern for each subregion on the target day is first determined. Then, by integrating weather scores and indicator-specific historical contribution weights, the generalized weather pattern for the entire region on the target day is derived. Finally, considering the variations in PV output characteristics under different generalized weather patterns, a regional PV power forecasting model tailored to each pattern is constructed using dynamic graph attention and kernel density estimation. Case-study experiments using data from a PV plant cluster in northern China are used to assess the forecasting performance of the proposed method.
Future hydrological droughts in reservoir-regulated regions remain uncertain due to the complex interactions between climate change and reservoir operation. Existing studies usually rely on simplified empirical representations of historical reservoir operations and rarely consider the role of optimal reservoir operation policies. Here, we used the upper Hanjiang River basin (UHRB) in China as a case study to project its future hydrological drought evolution using standard streamflow indices (i.e., SSI-1, SSI-3, and SSI-12) and to quantify the roles of climate change and reservoir operation. A long short-term memory (LSTM)-based hydrological model, coupled with a physics-informed LSTM reservoir model, was developed and driven by bias-corrected climate outputs from five global climate models to project future drought conditions under three scenarios (SSP126, SSP370, and SSP585). The results indicate that future climate change over the UHRB is projected to reduce natural streamflow and exacerbate hydrological droughts, with the most severe impacts projected in the far-future period (2071–2100) under SSP585. The traditional Ankang Reservoir operation reduces the frequency, duration and severity of short-term hydrological droughts (SSI-1 and SSI-3) under all scenarios, but shows limited effectiveness for long-term droughts (SSI-12). Importantly, optimal reservoir operating policies that aim to maximize hydropower generation and power generation guarantee rate reveal clear trade-offs between hydrological drought risk and hydropower benefits, thereby underscoring the importance of enhancing reservoir operation strategies for future drought management in reservoir-regulated basins.
Background : Wide-awake local anesthesia no tourniquet (WALANT) has demonstrated significant cost savings and improved patient experience in hand and upper extremity surgery. However, its economic value in arthroscopic knee surgery, particularly in meniscal procedures, remains poorly characterized. This study aimed to compare hospital costs, early postoperative pain trajectories, and functional recovery between WALANT and general anesthesia (GA) in patients undergoing arthroscopic meniscal surgery. Methods : A single-center retrospective cohort study was conducted on 39 consecutive patients undergoing arthroscopic meniscal surgery (GA, n=25; WALANT, n=14). The primary outcomes were total hospitalization cost and the proportion of anesthesia cost relative to total cost. Secondary outcomes included postoperative pain (visual analogue scale [VAS]) at four time points (immediate, 6h, 12h, 24h), and early recovery indicators. Costs were categorized into four domains: perioperative evaluation, anesthesia, surgical and intraoperative consumables, and hospitalization/nursing care. Stratified analyses by surgical type (meniscal repair vs. meniscectomy) were performed. Results : Anesthesia cost was considerably lower in the WALANT group (CNY 63.53 ± 29.76 vs. CNY 1,753.68 ± 188.61; p<0.001), and the proportion of anesthesia cost relative to total cost was 0.62 ± 0.30% vs. 14.09 ± 3.26% (p<0.001). Total hospitalization costs were significantly lower in the WALANT group (CNY 10,303.00 ± 2,217.00 vs. CNY 12,956.00 ± 2,608.00; p=0.003). WALANT patients demonstrated significantly lower immediate postoperative pain (VAS: 0.50 ± 0.90 vs. 2.90 ± 1.60; p<0.001), though pain scores converged at 6h, 12h, and 24h. Stratified analyses confirmed consistent anesthesia cost reductions in both the meniscal repair and meniscectomy subgroups. Conclusions : In selected patients undergoing arthroscopic meniscal surgery, WALANT was associated with significantly lower anesthesia-related expenditure and total hospitalization costs while providing superior immediate postoperative pain control compared with GA. These findings support WALANT as an economically advantageous and clinically feasible alternative in selected patients.