.
This study introduces a novel passive vibration control device, the parallel double-mass tuned damper inerter (P-DMTDI), which addresses key limitations of the conventional single-tuned mass damper inerter (S-TMDI). While the S-TMDI is effective, its drawbacks include excessive force feedback to the structure and difficulties in anchoring the inerter at lower floors for optimal performance. The proposed P-DMTDI mitigates these issues by connecting two tuned mass dampers placed on different floors via an inerter, thereby transferring the inerter's backward motion to the secondary mass rather than the building. The device's optimal parameters are determined using multiobjective particle swarm optimization, targeting reduced structural displacement and acceleration responses. Near-field pulse-like ground motions are chosen for evaluation due to their distinct characteristics, such as high-intensity velocity pulses, which create demanding conditions for vibration control strategies. The results show that the P-DMTDI outperforms the S-TMDI, with a response reduction ranging from 20% to 35%, particularly under seismic events with strong pulses, offering improved seismic response reduction while also presenting practical benefits for implementation. (c) 2025 American Society of Civil Engineers.
Drones equipped with onboard cameras offer promising potential for modern digital media and remote sensing applications. However, effectively tracking moving objects in real time remains a significant challenge. Aerial footage captured by drones often includes complex scenes with dynamic elements such as people, vehicles, and animals. These scenarios may involve large-scale changes in viewing angles, occlusions, and multiple object crossings occurring simultaneously, all of which complicate accurate object detection and tracking. This paper presents an autonomous tracking system that leverages the YOLOv8 algorithm combined with a re-detection mechanism, enabling a quadrotor to effectively detect and track moving objects using only an onboard camera. To regulate the drone’s motion, a PID controller is employed, operating based on the target’s position within the image frame. The proposed system functions independently of external infrastructure such as motion capture systems or GPS. By integrating both positional and appearance-based cues, the system demonstrates high robustness, particularly in challenging environments involving complex scenes and target occlusions. The performance of the optimized controllers was assessed through extensive real-world testing involving various trajectory scenarios to evaluate the system’s effectiveness. Results confirmed consistent and accurate detection and tracking of moving objects across all test cases. Furthermore, the system exhibited robustness against noise, light reflections, and illumination interference, ensuring stable object tracking even when implemented on low-cost computing platforms.
Back-to-Back Mechanically Stabilized Earth (BBMSE) walls in near slopes present complex stability challenges not fully addressed in current design standards. While most previous studies focus on isolated retaining walls, this study pioneers the investigation of coupled mechanical interactions between twin BBMSE walls under slope inclination (β = 35°, 40° and 45°). Employing advanced finite element modeling (FEM) (PLAXIS 2D), we systematically analyze three governing parameters: (1) slope angle (β); (2) wall-to-slope crest distance (Lₓ = 0.5, 1 and 1.5 m), and (3) geosynthetic reinforcement stiffness (J = 1100, 5000 and 10000 kN/m). The results quantify how these parameters influence failure mechanisms, peak tensile forces, wall displacements, and lateral earth pressures. The outcomes demonstrate that geometric configuration (β ; Lx) and reinforcement stiffness (J) are critical for BBMSE walls system stability. The horizontal displacement of the walls was observed in unequal, as the value on the right wall was greater than the left wall (the difference reaches 17%) . and the maximum tension in soil reinforcement were found to be unequal between the right and left sides due to the slope. The results highlight the critical role of geometric configuration and reinforcement properties in enhancing the performance of back-to-back walls on sloped ground and these findings challenge conventional design approaches and provide actionable recommendations for optimizing BBMSE walls in sloped environments.
In this paper, we describe a hybrid method for detecting and tracking moving objects in image sequences. Particle filters and color histograms are combined in the proposed method to address issues with occlusions, lighting variations, and object appearance. The goal of integrating these two techniques is to improve trackingrobustness. Experiments conducted in the OTB 2013 and OTB 2015 databases show that our method, called PFHist, outperforms several existing trackers. It achieves success up to 80% in terms of overlap rate and 94% accuracy in terms of center location error, especially in cases of partial or total occlusions. Moreover, the RGB color space has been shown to be more efficient than the HSV space, and the use of a reduced number of particles (100) allows for better performance while reducing computational cost. Future work will focus on the automatic selection of the optimal color space and on extending the method to multi-object tracking.