Ambient and elevated temperature biaxial flexural strength were measured for polished sapphire windows. Tested for comparison were windows given an SiO or glaze surface treatment. Infrared transmittance and visible imaging quality were unaffected by surface treatment while significant increases in strength and thermal‐shock resistance resulted.
A phase equilibrium study of the join lithium metasilicate–β–eucryptite in the system Li2O–Al2O3–SiO2 was made by the quench method. The phase diagram was found to be a simple binary with a eutectic at 1070°C and 57% eucryptite. The relationship of these data to the ternary system is discussed.
Journal Article Sociological Trends in the South Get access L. L. Bernard L. L. Bernard Pennsylvania State College Search for other works by this author on: Oxford Academic Google Scholar Social Forces, Volume 27, Issue 1, October 1948, Pages 12–19, https://doi.org/10.2307/2572453 Published: 01 October 1948
AbstractA procedure is outlined for routine qualitative analysis of certain common constituents of glass by means of spot tests using organic reagents according to the technique of Feigl. Sampling of the glass has been accomplished previously by using the powdered glass or by attacking the glass surface. A technique is discussed for the nondestructive testing of fabricated samples. Using this technique, a sample may be obtained by scratching the glass against a quartz plate. The method shows promise as a practical laboratory and plant tool.
A bstract The volume expansion of cristobalite, as it passes through the low‐temperature inversion range, was studied by means of a dilatometer in which the cristobalite expanded against a column of mercury. The volume change was measured in a capillary tube attached to the mercury column. The temperature of inversion is a function of the previous history of the cristobalite sample. A volume change of 7% was obtained upon inversion. The volume change was found to depend on the previous heat‐treatment of the sample, the presence of added catalysts, and the source and grain size of silica. All of these factors affect the amount of cristobalite present and hence the change of volume on inversion of the cristobalite. Several samples of cristobalite from used silica brick were studied. The information is applied to the problems of silica refractories.