Subsea 7 S.A. is a Luxembourgish-domiciled subsea engineering, construction and services company serving the offshore energy industry. The company is registered in Luxembourg with its headquarters in London.A.A.
Abstract The development of a high pressure and/or high temperature (HPHT) field with pressure rating greater than 15,000 psi or with a temperature rating greater than 350 °F represents a new technology step change and regulatory requirement for deepwater production system, which imposes challenges on riser design, fabrication and installation. This paper presents a design of production steel catenary riser (SCR) connected to the Shenandoah deep draft semi-submersible in 5,800ft water depth in the Gulf of America (GoA). The maximum source pressure for Shenandoah development is 16,100 psi, which falls under HPHT category. The challenges and solutions of HPHT SCR design, fabrication and installation are presented. The assessment of extreme strength responses from different riser concepts and hull configuration were performed to design an optimal configuration. The uncertainty of accurately determining H2S level at 20,000 psi pressure triggers regulatory requirements that riser has to be designed for sour-service condition, leading the challenges in fatigue design. The thick wall required for high pressure containment pushes the limit of pipe manufacturing. Annex B of API 1111 was used in the design to reduce wall thickness, and a set of supplemental burst tests were performed to validate the pipe for increased minimum burst pressure. The thick wall also posts challenges for welding and Automated Ultrasonic Testing (AUT), which required rigorous qualification programs to mitigate the project risk. In addition, the recovery tension of the thick wall SCR exceeds the pickup and recovery capacity of available installation vessels. A novel installation approach in which temporary buoyancy modules were used to reduce the riser recovery tension. This allowed the project to successfully deliver a safe and cost-effective approach to installing a heavy HPHT SCR in deepwater conditions utilizing the same anchor handling vessel used for the facility and mooring installation.
Abstract This paper presents an Artificial Intelligence (AI)-driven framework designed to enhance offshore foundation design by progressively replacing the high-cost and time-intensive finite element analyses (FEA) with fast, data-driven predictions. The framework uses a large numerical database to train predictive models capable of producing load–displacement responses and recommend optimal geometries for given soil profiles and combined horizontal-moment loads. The increased interest for finned suction piles in deepwater mooring systems, coupled with their complex response to combined horizontal and bending moment loads, makes them well suited for this purpose. Accordingly, the proposed methodology was applied to support and accelerate the design of this novel concept, which is well studied but not yet widely implemented. A large FEA dataset of more than thousand finned suction pile holding capacity calculations was generated by systematically varying the pile geometry, soil profile and loading scenarios and then an AI model was trained using this database to enable the prediction of the pile holding capacity by reproducing the FEA model's results. The AI framework enables engineers to explore multiple design configurations, perform sensitivity analyses, and optimize designs early in project development, reducing engineering hours and accelerating decision-making. While validated here for finned and plain piles, the methodology is fully adaptable to other offshore foundation systems making it a scalable solution for the broader offshore industry. By integrating AI into the design cycle, this approach bridges the gap between numerical modelling and practical engineering, paving the way for faster and more efficient offshore foundation and anchoring designs.
Abstract Accurate sea state data is essential for safe and efficient marine operations in the offshore energy sector. This paper presents a method for estimating sea state parameters directly from vessel motions measured by shipboard motion response units (MRUs), reducing the need for dedicated wave measurement equipment. The brute-force approach, developed by researchers at NTNU (Norway) and DTU (Denmark), iteratively solves the fundamental equation R = RAO * S, where R is the vessel response, RAO is the Response Amplitude Operator, and S is the wave spectrum. The algorithm is fast, solving for the sea state in less than 0.1 second per case. The inputs are the vessel response time series and the vessel RAO. The output is a 1D spectrum and a direction estimate. Additionally, the authors propose several techniques to improve the sea state estimates further. The method was tested on real life data from an offshore service vessel. Validation was performed using co-located data from a wave buoy within 20 km of the vessel position. The resulting dataset comprises 3,824 2D wave spectra measured over 7 months. The baseline algorithm and modified variants were compared against buoy-measured significant wave height (Hs), peak period (Tp), and mean direction (β). Results show strong agreement for Hs and Tp, with median errors below 0.25 m and 0.55 s, respectively. Direction estimates were less accurate, with a median error of 49°, largely due to ambiguity between port and starboard wave incidence.
Abstract Suction piles are widely used as offshore anchoring systems, with recent innovations focusing on fin-enhanced configurations to improve lateral capacity. Conventional designs with fins oriented perpendicular to the loading direction face practical limitations beyond a certain fin width threshold, as further increases in fin width may be restricted by fabrication and transportation logistics, deck space, late-stage design changes, and stiffness requirements associated with larger fins. This study investigates a novel arrangement combining regular fins with T-shaped fins aligned with the lateral loading direction, aiming to mobilize soil resistance in regions less effectively influenced by using perpendicular fins. Three-dimensional finite element analyses were conducted for a typical deepwater soft clay profile modeled with the Mohr–Coulomb constitutive model under undrained conditions. A load-controlled staged-construction procedure with incremental load amplification was adopted to obtain the stress–strain response and the lateral capacity. Results indicate that, while the conventional perpendicular-finned pile remains the most material-efficient option, the proposed T-fin strategy provides a complementary solution to enhance holding capacity when conventional fin widening is impractical. These findings provide a design-oriented insight into fin placement under constructability and structural constraints.
Background Angola is one of the most affected countries in sub-Saharan Africa and was off-track to meet the WHO Global Technical Strategy targeting of a 75% reduction in malaria incidence and mortality by 2025. Recent studies highlighted major knowledge gaps regarding malaria vectors in Angola, particularly secondary vectors. A malaria control project initiated in 2007 in Balombo (Benguela Province, central Angola) has monitored malaria dynamics for 18 years, revealing increased Plasmodium prevalence and more frequent detection of non-falciparum species, mainly Plasmodium malariae (in co-infection with P. falciparum ) in villagers of the Balombo region. This study aimed to characterize Anopheles populations in this region by assessing species composition, behavioural patterns, and infection rate. And to a less extent, to compare the performance of two indoor and outdoor mosquito trapping methods. Methods Surveys were conducted during the rainy (December 2023 and 2024) and dry seasons (July 2024) in villages around the town of Balombo. Adult mosquitoes were collected indoors and outdoors using CDC Light Traps and BG-Pro traps in randomly selected houses. Female Anopheles were morphologically and molecularly identified. Primary and secondary vectors were screened for Plasmodium spp . using qPCR-high resolution melting, and positive samples were sequenced. Results A strong seasonal effect was observed in Anopheles populations, with higher abundance, diversity, and Plasmodium - infection rates during the rainy season. An. funestus remained the main vector, but Plasmodium spp. was also detected in five other species: An. arabiensis , An. gambiae , An. marshallii , An. rufipes , and An. maculipalpis . This is the first report of P. malariae in Anopheles mosquitoes and the first mention of the role of secondary vectors in malaria transmission in Benguela Province. Conclusion This study provides a thorough and updated inventory of Anopheles species in the Balombo region. Molecular biology confirmed the presence of P. falciparum and P. malariae in several species of Anopheles underscoring the existence of a complex transmission system in villages of Balombo. Infected exophagic and exophilic Anopheles species, exhibiting opportunistic behaviour, likely contribute, as secondary vectors, to the increase of Plasmodium spp. transmission in the study sites. Therefore, confirming the need to implement complementary interventions targeting outdoor malaria transmission. Author Summary This study provides a thorough and updated inventory of Anopheles species in the Balombo region, conducted nearly two decades after the implementation of vector control interventions, in a setting where LLINs continue to be distributed. Sequencing confirmed the presence of Plasmodium spp. in Anopheles during both the dry and rainy seasons and revealed the first detection of P. malariae in mosquitoes collected in Angola. Although An. funestus remains the primary malaria vector in the Balombo region, the detection of Plasmodium spp. in five other Anopheles species highlights the existence of a more complex transmission system across the studied villages. While the sampling protocol and the relatively low numbers of An. funestus captured in some villages preclude definite conclusions regarding its behaviour, the possibility of a shift towards exophagy and exophily in some villages of Balombo is possible. It is therefore necessary to step up regular entomological surveillance, particularly in villages that were the focus of vector control campaigns between 2007 and 2011. Moreover, the detection of Plasmodium spp. in several secondary vectors exhibiting opportunistic and exophilic behaviours, such as An. marshallii , suggests that LLIN coverage alone may be insufficient to prevent exposure to infectious mosquito bites. A comprehensive assessment of LLINs use throughout the year is therefore needed, together with the adaptation of vector control strategies to address the contribution of exophilic vectors to malaria transmission in the villages of Balombo. ### Competing Interest Statement The authors have declared no competing interest. * ITNs : Insecticide-Treated Nets LLINs : Long-Lasting Insecticidal Nets IRS : Indoor Residual Spraying NMCP : Angolan National Malaria Control Program MCP : Malaria Control Program of Sonamet Company CDC-LT : Centers for Disease Control - Light Trap BGP : Biogent BG-Pro trap ITS2 : Internal Transcribed Spacer 2 PCR : Polymerase Chain Reaction RFLP : Restriction Fragment Length Polymorphism qPCR : Quantitative Polymerase Chain Reaction HRM : High-Resolution Melting