
Feedback stabilization of linear time-invariant (LTI) and single-input single-output (SISO) plants is considered within the framework of two-degree-of-freedom (2DOF) compensators, using only stable compensator components. In the classical 1DOF (or single feedback loop) setting, it is well known that a given plant can be stabilized by a stable controller if and only if it satisfies the parity interlacing property (PIP). With the 2DOF architecture proposed here, using stable components only, stabilization is possible for all plants with proper rational transfer functions. Our strategy is to create an effective plant that is biproper and has all its zeros in the left half-plane (LHP). Subsequently, a single large enough scalar gain (either positive or negative) is guaranteed to stabilize the system. We present several examples, including a cart with a double pendulum. While successful stabilization is mathematically achieved with stable compensator components in each case, some systems require high final gains.
This paper presents a control-oriented dynamic model, controller, and closed-loop mobility characterization for the first wind-powered spherical rover capable of net upwind motion. This device, termed the Spherical Sailing Omnidirectional Rover (SSailOR), incorporates design features within a spherical, terrestrial rover that mimic the role that a centerboard (or keel) and lifting sails play in allowing net upwind motion for sailboats. Specifically, a traction hoop enables significant lateral resistance, thereby providing a nonholonomic constraint in the direction of travel. Lifting sails enables net thrust even when traveling significantly upwind, while also providing heading control. While providing unique capabilities, the SSailOR gives rise to a complex design and control space, where careful model-based design and control are necessary to ensure that the SSailOR can simultaneously (i) make net upwind progress, (ii) respond quickly to wind speed/direction changes, (iii) limit heel angle, and (iv) control its heading. To simultaneously address these challenges, we first present a control-oriented dynamic model. This is followed by the presentation of a combined heading and heel angle controller. Finally, with the dynamic model and control structure in place, we present a detailed closed-loop Pareto analysis, which illustrates the tradeoff between transient and steady-state performance, along with the design features that favor one modality of performance over another.
This paper proposes a data-driven control allocation (CA) scheme for input-redundant linear time-invariant systems. Contrary to the existing literature, the present work is built on a static state-feedback controller with row-sparse structure that generates a virtual stabilizing input for the control allocation problem. It is emphasized that a stabilizing row-sparse static state-feedback controller always exists if the system is controllable and has input redundancy. With a set of available input-state data, a stabilizing controller is designed in linear matrix inequality (LMI) framework. The system matrix A and the input matrix B are assumed to be unknown. For control allocation, however, we have assumed that the linear dependence information of actuators is available. Both the continuous-time and the discrete-time systems have been considered. The pole placement technique has also been included in a data-driven design framework to ensure certain closed-loop performances. To demonstrate the effectiveness of the methodology, the proposed allocation approach is applied to two systems: a satellite launch vehicle model and an innovative control effector (ICE) aircraft model.
This study investigates a hierarchical optimal switching tracking control method intended to facilitate cyclic switching training in a rehabilitative walker. Reinforcement learning is utilized to optimize the performance of the human-robot system during the switching process, and it is designed on the basis of the switched stochastic configuration networks (SSCN) approximations under switchable observer-actor-evaluator (SOAE) online learning framework. The switching tracking control is designed hierarchically through the optimal backstepping technique to compensate for the influence of dynamically switching motion environments on tracking performance, thereby achieving simultaneous trajectory and velocity tracking. A redundant input switching model, accounting for human-robot interaction environments, is established by decomposing the coefficient matrices that affect the patient's position and posture. In addition, a time-based cyclic switching mode is developed, in which different training tasks are alternated at time intervals prescribed by the physiatrist. Finally, simulation analysis and experimental results demonstrate that the proposed method can flexibly and effectively support rehabilitation training.
Accurate onboard modeling is fundamental for the development and implementation of advanced control algorithms in aero-engines. The onboard model based on dynamic coefficient method has been applied in engineering due to its good real-time performance. However, conventional dynamic coefficient methods fail to fully account for the uncertainties inherent in the actual flight process, thereby limiting modeling accuracy. To address this issue, this paper proposes an improved dynamic coefficient modeling method for turboshaft engines based on uncertainty perception. The proposed approach first employs wavelet filtering to preprocess flight data and introduces a state-perception-based steady-state data selection strategy to avoid incorrect or missing selection of steady-state data. Subsequently, a Gaussian mixture model (GMM) clustering technique is utilized to quantify and perceive data uncertainty by calculating data dispersion, thus enabling uncertainty-driven data grouping and modeling. On this basis, optimization algorithms are incorporated to further refine the dynamic coefficients and enhance the accuracy of the dynamic model. Simulation results demonstrate that, while maintaining low algorithmic complexity and data storage requirements, the proposed method improves the average steady-state modeling accuracy for gas generator speed, compressor outlet pressure, and turbine outlet temperature by 38%, 56%, and 73%, respectively, compared with conventional methods. The average dynamic modeling accuracy is also improved by 41.4%, 39.4%, and 50.6%. These results verify that incorporating uncertainty perception can effectively enhance the modeling accuracy and practical value of onboard models.