
ABSTRACT Groundwater stress in hyper‐arid aquifers is often evaluated using climatic, hydrochemical, or isotopic evidence separately, limiting understanding of coupled water quantity and quality processes. This study addresses this gap through an integrated assessment of groundwater stress in Qatar. ERA5‐Land climate data (2009–2025), groundwater chemistry from 325 samples (2009, 2020, and 2022), stable isotopes, national water balance data, FAO‐56 evapotranspiration, hydrochemical indices, principal component analysis (PCA), PHREEQC, and spatial analysis were integrated. Annual ET 0 was 1580–2070 mm/year against only 11–105 mm/year precipitation and declined significantly ( τ = −0.456, p = 0.01198; Sen's slope = −6.98 mm/year). ERA5‐Land precipitation validation yielded r = 0.845, R 2 = 0.713, and +1.69% bias. Mean EC was 7682, 9282, and 42 674 μS/cm in 2009, 2020, and 2022, respectively. Groundwater salinity differed significantly among the three sampling datasets (Kruskal‐Wallis H = 17.16, p < 0.001). PCA showed that the first two components explained 89.5% of hydrochemical variance, with PC1 dominated by positive loadings of Na + , Cl − , SO 4 2− , Ca 2+ and Mg 2+ . Stable isotopes defined δ 2 H = 4.54δ 18 O + 0.46 ( R 2 = 0.50), indicating evaporative modification. Agricultural abstraction reached approximately 230 mm 3 /year, while recent groundwater balances remained negative. The framework identifies persistent climatic deficit, salinity heterogeneity, and abstraction pressure, supporting targeted monitoring, salinity risk management, and groundwater allocation decisions.
ABSTRACT This study evaluates two complementary perspectives for understanding how plants exploit stored soil water to sustain root water uptake (RWU) in Mediterranean agroecosystems. At the field scale, assessments rely on relationships between plant stress and spatially averaged soil moisture derived from remote and proximal sensing observations. While these approaches are adept at detecting the symptoms of water stress, they are inherently limited in identifying its underlying causes because they provide scant information on water dynamics occurring deeper within the soil profile. By contrast, a plot‐scale perspective based on the eco‐hydrological models offers a pathway to illuminate the hidden dynamics that govern plant water sourcing. To investigate these processes, a hydrochemical dataset comprising stable isotope concentrations, soil water contents, and matric pressure heads was collected at an experimental site in southern Italy and used to calibrate HYDRUS‐1D. Posterior distributions of hydraulic and transport parameters were estimated using the DREAM ZS Bayesian optimization algorithm. The validated model was used to quantify two water‐age indicators: RWU age (A RWU ), representing the average age of transpired water, and root water uptake transit time (τ RWU ), describing the time from event‐based rainfall to RWU. On average, transpired water resided in the vadose zone for approximately 4 months ( A RWU = 139 day). Results indicate that plants adopt a dual water‐sourcing strategy. Under severe drought conditions, however, A RWU exceeded 250 days, whereas the contribution of recent rainfall to transpiration became negligible, revealing a progressive shift from event‐driven to storage‐driven plant water sourcing. Importantly, drought impacts were only weakly reflected in simulated soil water storage, whereas A RWU and τ RWU provided direct evidence of changing hydrological connectivity between precipitation inputs and transpiration. These findings highlight the value of water‐age metrics for detecting drought impacts and characterizing plant access to subsurface water reserves beyond what soil moisture observations can infer.
ABSTRACT Groundwater sustains streamflow in humid catchments, yet the interactions among hydraulic properties, groundwater storage, and isotope‐derived indicators remain poorly understood in tropical environments. This study investigated how topographic position and saturated hydraulic conductivity ( K sat ) influence groundwater storage and subsurface flow along a plateau–hillslope–valley toposequence in a tropical forest headwater catchment in Central Amazonia, Brazil. Groundwater‐level observations, K sat measurements, stable isotopes ( δ 18 O, δ 2 H, and Δ LMWL ), Bayesian isotope mixing analysis, and Darcy‐based groundwater travel‐time proxies were integrated to investigate groundwater dynamics and streamflow generation. Plateau environments exhibited deeper groundwater tables, lower K sat , longer travel‐time proxies, and stronger isotopic damping, whereas valley environments showed shallower groundwater, higher K sat , shorter travel‐time proxies, and greater hydrological connectivity. Soil‐water isotope profiles revealed progressive attenuation of isotopic variability with depth, indicating increasing subsurface mixing and storage. Bayesian mixing analysis showed that groundwater contributed approximately 74% of streamflow during the dry season and 90% during the wet season. Overall, the results demonstrate that topographic position, groundwater depth, and hydraulic properties jointly regulate groundwater storage, groundwater–stream connectivity, and streamflow generation. The integration of hydraulic and isotope observations provides a process‐based framework for understanding groundwater‐controlled hydrological functioning in structured tropical catchments.
Stable-isotope mixing models are widely used to estimate the moisture recycling ratio (f re), yet uncertainties associated with model structure remain insufficiently evaluated. Using isotopic observations of local ambient vapour, multi-source upwind vapour, plant xylem water and soil water collected over the western Loess Plateau from April to October 2024, we compared f re and its component contributions estimated by IsoSource, IsoError, MixSIAR, MixSIR and Simmr. Model performance was assessed using internal reconstruction, inter-model differences and sensitivity to isotopic inputs. Mean f re values from Simmr, MixSIAR, MixSIR and IsoSource were 32.3%, 30.1%, 29.0% and 22.9%, respectively, whereas IsoError produced a physically unrealistic value of -3.7% and was excluded from subsequent analyses. All retained models identified advected vapour as the dominant source of local ambient vapour. MixSIR exhibited the best internal reconstruction performance, followed by MixSIAR. Differences among the three Bayesian models were not statistically significant before or after multiple-comparison correction; after Bonferroni correction, only Simmr differed significantly from IsoSource. Sensitivity analysis showed broadly consistent responses among the three Bayesian models, with f re sensitivity decreasing in the order of local ambient vapour, advected vapour, transpired vapour and evaporated vapour. Overall, under conditions of end-member overlap and observational uncertainty, Bayesian models provide a more systematic framework for quantifying f re uncertainty and offer useful guidance for model selection and uncertainty assessment in future f re studies. Improving the representativeness of local ambient vapour and advected vapour isotope observations remains an important pathway for reducing uncertainties in f re estimates.
ABSTRACT The transient storage model (TSM) is commonly used to simulate solute transport and exchange in the river corridor, processes that are central to the biogeochemical functioning of streams. Despite the widespread use of the TSM, establishing relationships between TSM parameter values and metrics of stream morphology has proven elusive. One possible explanation is poor parameter constraints obtained in previous modelling approaches, potentially because the slug tracers traditionally used for TSM calibration do not capture temporally longer flow paths. These flow paths may be important for better constraining parameter values during calibration. Including the environmental tracer radon in calibration may address this limitation, as radon traces temporally longer flow paths than slug injections of tracers such as chloride. We hypothesize that joint TSM calibration with chloride and radon will improve parameter constraints, expressed as greater information gain on TSM parameter values, particularly in more sinuous streams where temporally longer flow paths may be more prevalent. To test this hypothesis, we conducted chloride slug injections and radon measurements in multiple reaches across three streams where mean sinuosity ranged from 1.2 to 1.7. We calibrated a TSM using chloride data alone and jointly with chloride and radon. We evaluated which calibration approach provided more information gain on TSM parameter values by calculating the Kullback–Leibler divergence ( D KL ) and examined relationships between D KL values and reach sinuosity. We demonstrate that joint calibration with chloride and radon yields greater information gain on parameter values across reaches differing in sinuosity, potentially because joint calibration reduces equifinality. These findings highlight the potential of joint calibration with chloride and radon to improve parameter constraints in sinuous reaches and yield more reliable parameter estimates for the TSM in future applications.