
ABSTRACT Rising global soil salinity has increased freshwater scarcity, driving widespread use of reverse osmosis (RO) systems that generate high total dissolved solids (TDS) wastewater. This study investigated impact of RO reject water (ROR) at 100 mM of NaCl (ROR100) and 150 mM of NaCl (ROR150) treatments on tomato ( Solanum lycopersicum L) growth and yield. ROR treatments significantly reduced shoot (34.83 g) and root (1.65 g) fresh weights, plant moisture (55.85%) and leaf number (9.28) compared to control. However, plant height and stem thickness remained unaffected. Chlorophyll content increased significantly under salinity. ROR100 enhanced fruit minerals including magnesium (19.36%), phosphorus (107.21%), potassium (28.67%), calcium (23.35%), zinc (24.25%) and lycopene (208.18%). ROR150 treatment increased fruit number but reduced fruit weight and significantly decreased in essential nutrients, indicating ionic imbalance and stress. Overall, the ROR100 improved nutrient enrichment and fruit quality, whereas ROR150 impairs nutrient uptake and may induce stress‐related deficiencies. The integration of moderate ROR generated from water purifiers can be used for tomato cultivation if managed well.
ABSTRACT Phosphorus recovery from alternative waste streams is critical for sustainable nutrient management and circular economy strategies. This study investigates phosphate removal from human urine using electrocoagulation under different current densities and pH conditions. Batch experiments were performed in an electrochemical reactor with iron electrodes, and phosphate removal efficiency, pH variation, conductivity changes and reaction kinetics were evaluated. Results showed that higher current densities substantially enhanced removal rates, with 24 mA/cm 2 achieving over 80% phosphate removal within 10 min. Acidic conditions (pH 6) consistently resulted in the highest phosphate removal, while efficiency declined at higher pH due to reduced iron solubility and hydroxide competition. Kinetic analysis confirmed first‐order behaviour for phosphate removal across all operating conditions. In addition, phosphorus recovery from EC sludge was evaluated using chemical and microwave‐assisted extraction methods, achieving recovery efficiencies up to 62%. Overall, the results demonstrate that electrocoagulation is an effective method for phosphate removal from source‐separated human urine and provides considerable potential for subsequent phosphorus recovery.
Mainstream anaerobic ammonium oxidation (anammox) offers strong potential to reduce energy-intensive aeration in municipal wastewater treatment. This study evaluated the oxygen demand of mainstream anammox compared to conventional anaerobic-anoxic-oxic (A2O) and partial denitrification/anammox (PD/A) processes. A 5 & times; 5 & times; 3 simulation matrix was employed to assess the impacts of sidestream ammonium concentration (SAC), sidestream flow ratio (SFR) and mainstream ammonium concentration (MAC). Results demonstrated that oxygen demand reduction increased significantly with higher SAC and SFR. Notably, the comparative advantage of mainstream anammox expanded up to 18.58% in oxygen savings when evaluated against realistic, suboptimal PD/A scenarios (60% conversion efficiency). Gradient-based sensitivity analysis identified SAC and SFR as the dominant operational factors. Ultimately, this study highlights that mainstream anammox provides superior energy resilience and a robust alternative for nitrogen removal, particularly under fluctuating operational conditions in full-scale applications.
To our knowledge, this is the first comprehensive study to investigate how the lifespan and performance of ion-exchange membranes are affected during electrodialysis of run-off water laden with road de-icing salts. This study focuses on optimizing electrocoagulation (EC) and sand filtration as pretreatment methods to reduce membrane clogging in electrodialysis desalination of road run-off water from de-icing salts (RRWs). The goal was to minimize membrane fouling. Using factorial and central composite designs, 26 experiments were conducted to identify optimal EC conditions for turbidity and suspended solids (SS) removal. Results showed that electrolysis time was the most significant factor, achieving 78% SS and 86% turbidity removal. The optimal conditions-1.8 A for 3.8 min using an aluminium electrode-achieved over 98% removal. Sand filtration, by comparison, achieved 73.8% SS removal and 66% turbidity removal. Electrodialysis of clarified RRWs revealed that sand filtration led to a 10% decrease in chloride-ion separation and a 7% increase in energy consumption compared to EC pretreatment.