
Abstract Multi-beam-pumped optical parametric chirped-pulse amplification (OPCPA) systems suffer from parasitic parametric diffraction caused by nonlinear cross-coupling among intense laser beams, which severely degrades conversion efficiency. Although quasi-parametric amplification has been proposed to suppress cascaded nonlinear effects, its quantitative effectiveness in mitigating multi-beam parametric diffraction has remained experimentally unexplored. In this work, we experimentally demonstrate a quasi-parametric chirped-pulse amplification (QPCPA) scheme that actively depletes idler waves in a Sm-doped yttrium calcium oxyborate crystal to suppress parametric diffraction. We characterize the dependence of parametric diffraction on the pump beam angle and intensity, and evaluate the suppression performance provided by idler dissipation. Experimental results in a two-beam-pumped configuration show that the QPCPA scheme reduces pump-to-diffraction conversion by more than 60% compared to conventional OPCPA. Robust cross-coupling suppression is maintained across a range of operating conditions. By establishing a clear experimental link between idler dissipation and diffraction suppression, this work provides a practical pathway for scalable energy enhancement in multi-beam nonlinear combining systems, supporting the advancement of high-energy OPCPA architectures.
Abstract Efficient generation of microjoule-level long-wave mid-infrared pulses at high repetition rates remains challenging because conventional difference-frequency generation (DFG) systems typically rely on white-light-seeded optical parametric amplification (OPA) chains with limited overall efficiency. Here we demonstrate a Raman-shifted multi-pass-cell-driven DFG scheme for tunable 5.6–11 μm mid-infrared generation. A He–CO 2 ${}_2$ Subscript 2 molecular-gas multi-pass cell (MPC) efficiently converts 1025 nm pump pulses into a 1.10–1.25 μm signal through Raman-dominated red shifting, with a filtered-signal conversion efficiency of 17%–32% at repetition rates up to 40 kHz. The generated signal is combined with a synchronized 1025 nm pump beam and converted in a LiGaS 2 ${}_2$ Subscript 2 crystal. The system delivers 179 mW at 6 μm, corresponding to 4.5 μJ pulses and a pump-to-idler efficiency of 6.4%, and 168 mW at 7 μm with a maximum quantum efficiency of 41%. By replacing the OPA-based signal-generation chain with an efficient Raman-shifted molecular-gas MPC, this architecture offers a scalable route toward high-repetition-rate, high-energy long-wave mid-infrared ultrafast sources.
This paper presents the design and implementation of a distributed control system for the laser wakefield acceleration (LWFA) facility at the Shanghai Institute of Optics and Fine Mechanics (SIOM), Chinese Academy of Sciences. This system is developed to support artificial intelligence (AI) integration and automated tuning. Built on the Experimental Physics and Industrial Control System, it provides real-time monitoring, device control, alarm handling and data archiving. To enhance modularity and scalability, unified multiuser interfaces were developed using Control System Studio within a microservice architecture. Remote direct memory access was adopted to remove bottlenecks in high-throughput image data transmission, and a hybrid storage framework combining MySQL, InfluxDB and MinIO was implemented for efficient data storage and management. The system has been comprehensively tested in both laboratory and operational environments. This work offers a practical solution for the intelligent evolution of LWFA facilities, laying the groundwork for future AI-driven laser-plasma accelerator systems.
A technique developed for capturing and monitoring the back-reflected (BR) laser light in experiments utilizing the world's most powerful laser (high-power laser system, HPLS) at the Extreme Light Infrastructure - Nuclear Physics facility is presented. We address the challenge of characterizing BR light generated during the first laser shots delivered on thin-foil targets by using two optical setups: a full-aperture image relay system capable of imaging the full beam profile along the propagation of the laser beam path and a small-aperture monitoring (SAM) system that captures low levels of BR energy in the range of a few tens of millijoules to over 100 mJ. SAM characterizes the temporal profile of the BR pulses with a resolution of 0.3 ns. We model the amplification of BR light along the laser chain, which correlates the measured back-reflection with the target reflectivity. Our techniques allow for precise monitoring of the BR beam dynamics ensuring at the same time the safety of the HPLS.