
Las estructuras laminares reticulares de madera deformadas elásticamente (elastic timber gridshells) destacan por su eficiencia material y sostenibilidad al emplear tiras inicialmente rectas de madera de pequeña sección que se curvan en flexión activa. No obstante, su desarrollo ha estado condicionado por una laboriosa puesta en obra, dependiente de medios auxiliares y de un intensivo trabajo manual in situ. El presente trabajo plantea una nueva metodología de diseño y fabricación que integra la eficiencia propia de la flexión elástica con técnicas de fabricación digital mediante maquinaria por control numérico de tres ejes y el uso de uniones carpinteras para fomentar la prefabricación de este tipo de estructuras. Se explora la capacidad de patrones con trayectorias biaxiales para generar mallados perpendiculares, se analizan las ventajas constructivas derivadas y se propone un novedoso concepto de sistema de conexión nodal basado en uniones carpinteras ortogonales integradas en la geometría de las láminas. Esto permite el mecanizado de la estructura empleando tableros estructurales. Los principios del sistema se integran en un flujo de trabajo paramétrico que abarca desde el diseño hasta la fabricación, validado mediante diversos prototipos a escala y un demostrador a escala real de 7,5 m de luz. Los resultados muestran la viabilidad del enfoque propuesto para integrar procesos de fabricación digital y prefabricación off-site, favoreciendo la reducción de las operaciones manuales durante el ensamblaje. Finalmente, se identifican las limitaciones del sistema y los principales desarrollos necesarios para su escalabilidad.
The technological quality and potential utilization of wood from individual Eucalyptus clones under Moroccan plantation conditions remain uncertain, particularly for clone 699 at the age and under the plantation conditions investigated in this study. This study aimed to evaluate the physical and mechanical properties of wood from a nine-year-old Eucalyptus camaldulensis clonal plantation (clone 699) in Morocco and to provide evidence on its potential for alternative wood uses. Ten logs from ten different trees were collected and processed into standardized test and volumetric shrinkage, and shrinkage anisotropy, while mechanical characterization included dynamic and static modulus of elasticity, bending strength, compression strength, and axial tensile strength. The studied wood showed high basic density (668kg/m3), medium volumetric shrinkage (14,53%), and normal shrinkage anisotropy (2,40), while its mechanical properties were generally in the low-to-intermediate range compared with previously reported Eucalyptus materials. Overall, the physical and mechanical characterization provides evidence on the technological quality of nine-year-old clone 699 under the studied plantation conditions and contributes to reducing uncertainty regarding its potential utilization beyond its traditional applications.
The influence of pilot-hole geometry on screw holding strength in solid softwood furniture elements remains insufficiently understood, particularly when wood species, pilot-hole dimensions, and grain direction are considered simultaneously. This study aimed to investigate the effects of pilot-hole diameter and depth on the screw holding strength of selected softwood species commonly used in furniture manufacturing and to identify the best-performing pilot-hole configurations among the tested levels for different grain directions. The materials examined were Larix decidua Mill. (larch), Pinus sylvestris L. (Scotch pine), Abies sp. (fir), Picea orientalis L. (spruce) and Cedrus libani A.Rich (cedar). A total of 900 specimens were prepared, comprising 5 wood species, 9 pilot hole configurations (3 diameter by 3 depth), and 10 replications for each condition. Screw withdrawal tests were conducted under static tensile loading, with 450 specimens tested parallel to the grain and 450 perpendicular to the grain. The results indicated that, for the withdrawal tests parallel to the grain, the highest mean screw holding strength was obtained with a pilot-hole diameter corresponding to 50 % of the screw diameter, while pilot-hole depth had no significant main effect. In case of the withdrawal tests perpendicular to the grain, highest mean screw holding strength was obtained with a pilot-hole diameter corresponding to 75 % of the screw diameter, whereas pilot-hole depth again showed no significant main effect. Wood species and pilot-hole diameter significantly affected screw holding strength, and all two-way and three-way interactions were significant. Cedar exhibited the highest mean screw holding strength in both loading orientations. These findings highlight the importance of considering pilot-hole diameter in relation to wood species and grain direction for screw connections in solid softwoods.
This study aims to compare the effects of anatomical structural differences in different tree species on the industrial processing capabilities of CNC lasers. For this purpose, solid wood materials were laser-cut at a speed of 10 mm/s and laser-engraved at a feed rate of 200 mm/s using a 130-watt carbon dioxide-filled glass tube CNC laser machine. The effects of the anatomical structures of six different solid wood materials (heartwood, sapwood, early wood, and late wood) on laser cutting and laser engraving were investigated. The macroscopic anatomical structure of the wood was examined in terms of ease of direct application in production. As a result, for all six different solid wood materials, it was found that early wood sections were easier to process than late wood sections in both laser cutting and laser engraving. The differences in laser processing performance between early and late wood were found to be statistically significant. The positive or negative effects of heart, sapwood, and heartwood anatomical sections on both laser cutting and laser engraving were not found to be statistically significant for all tree species. However, these effects were evaluated proportionally among all tree species. Overall, the heartwood and sapwood of solid wood species showed approximately the same laser cutting performance, with heart exhibiting lower laser cutting performance. On the other hand, the sapwood of solid wood species generally showed better laser engraving performance than both heart and heartwood, while heart and heartwood showed approximately the same laser engraving performance. Consequently, it was concluded that laser operators would be more accurate to separately evaluate the positive or negative effects of anatomical cross-sections of heartwood and sapwood on both laser cutting and laser engraving for each wood species, based on numerical data.
The quality grading of rotary-cut veneers, as defined by various standards, considers the quality features and surface appearance of plywood or molded plywood. This grading primarily focuses on visual surface characteristics, such as knots, cracks, and discoloration. However, the correlation between these quality grades and the internal structural features, such as fiber deviations, lathe check depth, and frequency, and their impact on mechanical properties remains unexplored. This study investigates the relationship between the quality grades (A, B, and C) of Fagus sylvatica (european beech veneers) and their mechanical performance, as represented by the modulus of elasticity and the tensile strength. Structural features were quantitatively analyzed. Tensile tests revealed that veneers of quality grade C exhibited significantly lower modulus of elasticity (10737 MPa) and tensile strength (78,2 MPa) than grades A and B. Grade B veneers showed comparable modulus of elasticity values of 13500 - 13800 MPa but differing tensile strengths of 88,3 MPa for grade A and 116,8 MPa for grade B on average. Structural analysis indicated that grade C veneers exhibited the highest fiber deviations in the thickness direction (up to 20 %) and the highest lathe check depths (46 %), suggesting a qualitative alignment between grading and structural integrity. However, the structural differences between grades A and B did not consistently reflect their mechanical performance.